We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 DIMM sticks, 288-pin, 32GB kit

Blazing Memory

Blazing Memory BM32GKITD43200DT 32GB DDR4 3200MHz 2x16GB accessory

SKU CH-RVBJ-XB5XY

A 32 GB DDR4 desktop kit of two matched 16 GB modules running at 3200 MHz with 1.2 V operation

  • 32 GB total capacity from two matched 16 GB modules
  • DDR4 3200 MHz speed delivers PC4-25600 bandwidth
  • 2 V operation keeps power draw low
  • 288-pin DIMM form factor fits standard desktop slots
  • Unbuffered non-ECC design suits consumer motherboards

32GB DDR4 desktop memory kit

This kit supplies 32 GB of DDR4 memory as two matched 16 GB modules. Each module uses a 288-pin DIMM form factor and runs at 3200 MHz with a PC4-25600 bus speed. The memory is unbuffered, non-ECC and operates at 1.2 V. It is built for desktop systems that accept DDR4 DIMMs.

Suits builders upgrading compatible desktops

The kit fits desktop boards that support DDR4 3200 MHz DIMMs in dual-channel configurations. It will not serve laptops, servers requiring ECC or registered memory, or systems limited to lower DDR4 speeds. Buyers needing a single module, a different capacity or a notebook form factor should look elsewhere.

Dual-channel 2x16 GB matched pair

The two modules are factory matched to run together in dual-channel mode, delivering the full 32 GB capacity at the rated 3200 MHz speed. This pairing is the specification that determines whether the kit works as intended in a desktop with two available DIMM slots.

Highlights

  • 32 GB total capacity from two matched 16 GB modules
  • DDR4 3200 MHz speed delivers PC4-25600 bandwidth
  • 2 V operation keeps power draw low
  • 288-pin DIMM form factor fits standard desktop slots
  • Unbuffered non-ECC design suits consumer motherboards

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 288-pin DDR4 DIMM modules and what step do people often miss?

Align the notch on each 16 GB module with the motherboard slot key, press firmly until the retention clips click, then verify in BIOS that both modules run at 3200 MHz.

What maintenance or replacement will this 32 GB kit need later?

No routine maintenance is required; keep the contacts dust-free and replace a module only if memory diagnostics report errors.

What limit appears first under sustained use with these 1.2 V DDR4 modules?

The JEDEC 1.2 V voltage ceiling is reached before thermal throttling, so stability depends on the motherboard keeping the DIMMs within spec.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.