We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green circuit boards with black memory chips and gold edge connectors

Blazing Memory

Blazing Memory 16GB DDR4 2133 MHz 2×8GB SO-DIMM kit

SKU CH-P4ES-JG01D

A 16 GB dual-channel DDR4 SO-DIMM kit running at 2133 MHz with 1.2 V operation for laptop upgrades

  • 16 GB total capacity from two matched 8 GB modules
  • Dual-channel 2133 MHz DDR4 speed rated at PC4-17000
  • Low 1.2 V operation reduces laptop power draw
  • 260-pin SO-DIMM form factor fits standard DDR4 notebook slots
  • Non-ECC unbuffered design works with mainstream laptop memory controllers

16GB DDR4 SO-DIMM kit

This 16GB DDR4 kit contains two 8GB SO-DIMM modules rated at 2133 MHz. It is built for laptops that accept 260-pin DDR4 memory and need a matched pair for dual-channel operation. The kit suits users upgrading or repairing a notebook with compatible slots.

Unbuffered non-ECC modules

Each module runs at 1.2V and is unbuffered with non-ECC error handling. The PC4-17000 rating confirms the 2133 MHz bus speed without requiring manual configuration. The anti-static bags protect the sticks during handling and storage before installation.

Straightforward slot installation

Installation follows the standard SO-DIMM procedure: align the 260-pin notch, insert at an angle, then press down until the clips engage. The only common issue is a slot that only supports lower-density chips, which will prevent the 8GB modules from being recognised.

Highlights

  • 16 GB total capacity from two matched 8 GB modules
  • Dual-channel 2133 MHz DDR4 speed rated at PC4-17000
  • Low 1.2 V operation reduces laptop power draw
  • 260-pin SO-DIMM form factor fits standard DDR4 notebook slots
  • Non-ECC unbuffered design works with mainstream laptop memory controllers

Specifications

No published specifications for this item yet.

Questions about this item

Will the 260-pin SO-DIMM modules need replacement if I upgrade to a faster DDR4 speed later?

The kit runs at 2133 MHz (PC4-17000). If your next laptop requires a higher DDR4 speed, these modules will run at the lower speed or may not be supported, so a replacement would be needed.

What limit appears first when the 1.2 V modules run at 2133 MHz continuously?

The JEDEC-standard 2133 MHz rating is the ceiling; the memory controller will not push the sticks beyond this speed, so the frequency limit is reached before any thermal or voltage limit.

How much heat does the 16 GB kit produce inside a laptop chassis all day?

At 1.2 V and 2133 MHz the modules are unbuffered, non-ECC DDR4 SO-DIMMs with no heatsinks, so they generate only modest warmth that the laptop’s normal airflow handles without extra cooling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.