Blackmagic Design Pty. Ltd.
Blackmagic Design Micro Converter SDI to HDMI 12G professional video device
Converts 12G-SDI to HDMI up to 2160p60 with 33-point 3D LUT and USB power
- Compact design enables portable broadcast workflows
- USB powering allows operation from laptops or battery packs
- 33-point 3D LUT provides monitor colour calibration
- Supports SD, HD and Ultra HD up to 2160p60
- 12G-SDI with re-clocking maintains signal integrity over long cables
Compact 12G-SDI to HDMI converter
The Blackmagic Design Micro Converter SDI to HDMI 12G is a professional video device that converts 12G-SDI signals to HDMI output. It supports video standards including NTSC, PAL, 720 HD, 1080 HD and 2160 Ultra HD up to 60 frames per second. The unit features built-in SDI re-clocking and draws power via USB for portable operation.
Suited for broadcast and on-location monitoring
This converter suits engineers integrating consumer HDMI displays with professional SDI infrastructure in studios or field productions. It also serves colourists needing 33-point 3D LUT calibration for accurate monitoring. Buyers requiring HDMI to SDI conversion or multiple simultaneous outputs should look at alternative devices.
USB power and included supply expand placement
The included power supply allows operation from standard mains outlets when USB ports are unavailable. USB powering also enables use with laptops, televisions or portable battery packs for remote shoots. Software upgrades are performed through the USB connection, keeping the converter current with evolving broadcast standards.
Highlights
- Compact design enables portable broadcast workflows
- USB powering allows operation from laptops or battery packs
- 33-point 3D LUT provides monitor colour calibration
- Supports SD, HD and Ultra HD up to 2160p60
- 12G-SDI with re-clocking maintains signal integrity over long cables
Specifications
No published specifications for this item yet.
Questions about this item
What power source do I need to run the Micro Converter SDI to HDMI 12G?
The unit draws power from any standard USB port, so a laptop, television or portable battery pack is sufficient.
Will my 1080p camera feed pass through the converter without re-clocking issues?
Built-in 12G-SDI re-clocking cleans the incoming signal, allowing 1080p and other supported formats to pass reliably.
How can I verify the 3D LUT is active on my HDMI monitor after setup?
Load a 33-point 3D LUT via the USB software utility; the monitor will immediately show the calibrated colour space.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



