BLACKHORSE-RACING Universal 16" Electric Radiator Fan Kit 1000 CFM Black
16-inch 12V cooling fan delivers 1000 CFM with included 180°F thermostat kit and reversible blades for push or pull airflow
- Delivers 1000 CFM airflow for strong engine cooling
- 120 W high-torque motor with sealed ball bearings runs smoothly
- Adjustable thermostat activates at 180 °F and shuts off at 165 °F
- Reversible blade and wiring allow pusher or puller configuration
- Slim 3.27 in profile fits tight engine bays
Universal 16" Electric Radiator Fan Kit
This 16 inch universal electric radiator fan kit suits cars, trucks and custom builds that need extra airflow through a radiator, oil cooler, transmission cooler or condenser. The package includes the fan, mounting brackets, tie straps, a thermostat probe, relay and wiring switch for a complete installation. It is not for vehicles that require a larger diameter fan or higher static pressure than this single unit provides.
1000 CFM airflow with 120 W motor
The 10 blade curved fan moves up to 1000 CFM at 2000 RPM while drawing 11 amp from a 12 V system. The 120 W high torque motor uses sealed ball bearings and fully balanced blades for smooth operation. At 3.27 inch thickness the slim design fits tight engine bays, but the single fan will run out of capacity on very large radiators or in extreme heat soak conditions.
Low noise thermostat controlled cooling
The included thermostat activates the fan at 180°F and shuts it off at 165°F, reducing unnecessary run time and noise. Sealed ball bearings and balanced blades keep sound levels low during normal operation. The 11 amp draw requires adequate wiring and a healthy charging system; vehicles with marginal alternators may see voltage dip when the fan cycles on.
Highlights
- Delivers 1000 CFM airflow for strong engine cooling
- 120 W high-torque motor with sealed ball bearings runs smoothly
- Adjustable thermostat activates at 180 °F and shuts off at 165 °F
- Reversible blade and wiring allow pusher or puller configuration
- Slim 3.27 in profile fits tight engine bays
Specifications
| Brand | BLACKHORSE-RACING |
|---|---|
| Model | Universal |
| Part Number | ERER17502-16-BK+09 |
Questions about this item
Will the 16 inch 1000 CFM fan fit my existing radiator core support?
Measure your radiator width and depth first; the fan overall diameter is 16.05 inches and thickness is 3.27 inches, so compare those figures to your core opening before mounting.
How do I verify the thermostat kit is activating at the correct temperature?
The probe turns the fan on at 180°F and off at 165°F; watch the temperature gauge as the engine warms — the fan should start near 180°F and stop once it drops to 165°F.
Does the box include the relay, wiring harness and mounting hardware, or must I buy them separately?
The kit supplies the 16 inch fan with 10 curved blades, 120 W motor, 11 amp draw, thermostat probe with 3/8 inch NPT thread and 1/2 inch NPT adapter, relay, switch, wiring, mounting brackets and tie straps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
