We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black PVC-coated aluminium T connector, four holes both sides, 4.500 length

Blackburn

Blackburn AMT Connector PVC Coated 4 Hole T Type 4.500

SKU CH-1WXN-2779V

A PVC-coated aluminium multitap connector with four ports accepting 10 AWG to 350 kcmil conductors, rated 600 V and 194 °F, UL and CSA listed

  • Length4.500
  • MaterialAluminum
  • Type4-Holes, Both Sides, T
  • Accepts 10 AWG to 350 kcmil copper and aluminum conductors
  • PVC coating rated to 194 °F for durable insulation
  • Four ports on both sides in a T layout
  • UL E9809 and CSA 6591 listed for 600 V service
  • Hex-head set screws with 3/16 in drive for secure termination

Blackburn AMT Connector PVC Coated 4 Hole T Type

This Blackburn AMT connector is a multitap designed for joining up to four conductors in a T-configuration. It accepts stranded copper, aluminium or copper-clad aluminium wires ranging from 10 AWG to 350 kcmil. The body is aluminium with a black PVC coating and is rated for 600 V maximum voltage.

Four-port T-configuration for multi-conductor

The connector provides four ports arranged on both sides of a T-shaped body, allowing a main run to be tapped in three directions. Each port uses a hex-head set screw with a 3/16 in hex size to secure the conductor. This layout suits branch-circuit splices where a single feed splits to multiple loads.

Rated for 194 °F operation with CSA and UL listings

The PVC insulation is rated for a maximum operating temperature of 194 degrees Fahrenheit under normal load. The connector carries CSA standard 6591 and UL file E9809 approvals for use with aluminium, copper and copper-clad aluminium conductors. It is not suited for applications exceeding the 600 V or temperature limits.

Highlights

  • Accepts 10 AWG to 350 kcmil copper and aluminum conductors
  • PVC coating rated to 194 °F for durable insulation
  • Four ports on both sides in a T layout
  • UL E9809 and CSA 6591 listed for 600 V service
  • Hex-head set screws with 3/16 in drive for secure termination

Specifications

BrandBlackburn
Length4.500
MaterialAluminum
Type4-Holes, Both Sides, T

Questions about this item

How much current can the 600 V rating actually carry once the connector is installed?

The 600 V rating is the maximum voltage the insulation will withstand; the actual current capacity depends on the conductor size you fit, which ranges from 10 AWG up to 350 kcmil stranded copper or equivalent aluminium.

What does the UL E9809 and CSA 6591 listing cover for this four-port aluminium body?

Both listings certify the connector for use with aluminium, copper and copper-clad aluminium conductors at up to 600 V and 194 °F, with a 3/16 in hex screw for each of the four ports.

What clearance do I need to mount the 4.500 in long T-shaped body with four ports on both sides?

The body measures 4.500 in overall and has four ports arranged in a T pattern with two holes on each side, so allow at least that length plus room for the 3/16 in hex tool to reach each screw.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.