We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two compact silver metal boxes with DVI, RJ-45 and audio ports, wall-mount brackets and power supplies

Black Box Corporation

Black Box AVX-DVI-TP-100M DVI extender 330 ft 10.2 Gbps

SKU CH-BAM7-YVFP2 MPN AVX-DVI-TP-100M

Extends DVI-D video, stereo audio and RS-232 up to 330 ft over a single CAT5e/6/7 cable with HDCP support

  • Distance330 ft. (100 m)
  • Resolution Support480p/720p/1080p at 60 Hz; 1920 x 1200 and 1600 x 1200 at 60
  • Video Bit Rate/Bandwidth340 MHz (10.2 Gbps)
  • Power Consumption20W
  • Power SupplyAC input: 100-240 VAC, 50-60 Hz, 0.8 A Output: 5-VDC, 2 A
  • SpecificationAudio Support: Stereo 2-channel analog audio RoHS: Yes Conne
  • Extends DVI-D video 330 ft over single CAT5e/6/7 cable
  • Supports 1920 x 1200 and 1080p at 60 Hz with 10.2 Gbps bandwidth
  • Carries stereo analog audio and RS-232 control alongside video
  • HDCP signal extension protects encrypted content to remote display
  • Wall-mountable transmitter and receiver units each weigh 0.9 lb

DVI extender with audio and RS-232

The Black Box AVX-DVI-TP-100M extends DVI-D video, stereo analog audio and RS-232 control signals over a single CAT5e/6/7 cable up to 330 ft. It supports resolutions up to 1920 x 1200 at 60 Hz and passes HDCP content protection to the remote display. The transmitter and receiver units each measure 4.1 in wide by 3.0 in deep by 1.3 in high and weigh 0.9 lb.

Wall-mountable transmitter and receiver pair

Installation uses the included wall-mount brackets and two external power supplies that accept 100-240 VAC input. Connect the DVI-D source and audio to the transmitter, run one CATx cable to the receiver, then attach the display and RS-232 device. Common issues include exceeding the 330 ft distance limit, using cable below CAT5e specification or neglecting to power both units, any of which will break the video link.

Pro AV installs needing long DVI runs

This extender suits integrators who must bridge 330 ft between a DVI source and a display while carrying stereo audio and RS-232 control. It is not suited for installations requiring 4K or higher resolutions, digital audio formats such as S/PDIF or HDMI embedded audio, or runs longer than the specified distance. Buyers needing HDMI, DisplayPort or fiber-based extension should evaluate other product families.

Highlights

  • Extends DVI-D video 330 ft over single CAT5e/6/7 cable
  • Supports 1920 x 1200 and 1080p at 60 Hz with 10.2 Gbps bandwidth
  • Carries stereo analog audio and RS-232 control alongside video
  • HDCP signal extension protects encrypted content to remote display
  • Wall-mountable transmitter and receiver units each weigh 0.9 lb

Specifications

BrandBlack Box
ModelAVX-DVI-TP-100M
Distance330 ft. (100 m)
Resolution Support480p/720p/1080p at 60 Hz; 1920 x 1200 and 1600 x 1200 at 60 Hz
Video Bit Rate/Bandwidth340 MHz (10.2 Gbps)
Power Consumption20W
Power SupplyAC input: 100-240 VAC, 50-60 Hz, 0.8 A
Output: 5-VDC, 2 A
SpecificationAudio Support: Stereo 2-channel analog audio
RoHS: Yes
Connectors: Transmitter: 1 x DVI-D F input, 1 x DB9 F (RS-232), 1 x 3.5-mm input jack (stereo audio), 1 x RJ-45 (CATx interconnect)
Receiver: 1 x DVI-D F output, 1 x DB9 M (RS-232), 1 x 3.5-mm output jack (stereo audio), 1 x RJ-45 (CATx interconnect)
Indicators: 2 x LEDS on both the transmitter and receiver: 1 x Power, 1 x Link
FeatureUse a single CAT5e/6/7 run for extending DVI-D video plus audio.
Also extends RS-232 and HDCP signals to the remote screen.
Goes much farther than standard DVI cabling-up to 330 feet (100 m)
Dimensions4.1"W x 3.0"D x 1.3"H
Weight0.9lb
Shipping weight2.54 kg
Package size381 × 381 × 381 mm

Questions about this item

How do I confirm the AVX-DVI-TP-100M is passing video and audio correctly after installation?

Connect the transmitter and receiver with a CAT5e/6/7 cable, attach a DVI-D display to the receiver output, and verify the screen shows 1920 x 1200 at 60 Hz while audio plays through the 3.5 mm stereo jack.

What items ship with the AVX-DVI-TP-100M kit and what must be purchased separately?

The box contains one transmitter, one receiver, two power supplies with cords, two wall-mount brackets, four screws and a user manual; you must supply your own CAT5e, CAT6 or CAT7 cable for the 330 ft link.

Which resolution setting should I select on the source to match the extender's 340 MHz bandwidth limit?

Choose 1920 x 1200 at 60 Hz or 1080p at 60 Hz; both fit within the 10.2 Gbps ceiling and are listed as supported modes.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.