We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rectangular 2.5 inch SSD with label showing 256GB MLC SATA III

BIWIN STORAGE TECHNOLOGY LIMITED

BIWIN STORAGE TECHNOLOGY LIMITED 256GB MLC 2.5" SATA internal SSD

SKU CH-720X-ANR5P

A 2.5 inch SATA internal SSD with 256GB of MLC flash delivering sequential reads up to 561MB/s and writes up to 452MB/s

  • Device TypeInternal Solid State Drive (SSD)
  • Form Factor2.5"
  • Capacity256GB
  • Memory ComponentsMLC
  • InterfaceSATA III
  • Power Consumption (Idle)0.25W

Options 256GB

  • MLC flash delivers reliable endurance for daily workloads
  • Sequential read up to 561MB/s speeds up boot and load times
  • Sequential write up to 452MB/s handles large file transfers efficiently
  • BCH ECC 66 bits/1KB protects data integrity during operation
  • Low 0.25W idle power extends laptop battery life

BIWIN 256GB MLC SATA SSD

This 2.5-inch internal solid-state drive uses MLC flash and a SATA III interface to deliver 561MB/s read and 452MB/s write speeds. It targets everyday computing workloads such as operating-system boots, application launches and general file storage. The 7mm height fits standard laptop and desktop drive bays.

256GB capacity and MLC endurance

At 256GB the drive holds a mainstream operating system, core applications and a working set of documents with room for updates. MLC memory provides higher write endurance than entry-level alternatives, while BCH ECC 66 bits/1KB protects data integrity. Active power draw reaches 2.94W and idle drops to 0.25W.

SATA III 6Gb/s interface limits

The SATA III link caps sequential throughput at the stated 561MB/s read and 452MB/s write, so heavier workloads such as sustained 4K video editing or large database writes will saturate the bus. Operating temperature ranges from 0°C to 70°C and shock tolerance is rated at 50G for 11ms half-sine events.

Highlights

  • MLC flash delivers reliable endurance for daily workloads
  • Sequential read up to 561MB/s speeds up boot and load times
  • Sequential write up to 452MB/s handles large file transfers efficiently
  • BCH ECC 66 bits/1KB protects data integrity during operation
  • Low 0.25W idle power extends laptop battery life

Specifications

BrandBIWIN
Device TypeInternal Solid State Drive (SSD)
Form Factor2.5"
Capacity256GB
Memory ComponentsMLC
InterfaceSATA III
Power Consumption (Idle)0.25W
Power Consumption (Active)2.94W
Operating Temperature0°C to 70°C
Storage Temperature-40°C to 85°C
Operating Humidity5% to 95%
Max Shock Resistance50G,11ms, half-sine wave
Max Vibration Resistance3.1G(2-500Hz) 3.9
Height100.2mm
Width69.8mm
Depth7.0mm
Weight=80g

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2.5" 7mm SATA III drive fit and run alongside my older 3Gb/s SATA motherboard?

The drive is SATA 6Gb/s and backward compatible with SATA 3Gb/s, so it will work on your older board at the slower link speed.

How can I verify the 561MB/s read and 452MB/s write speeds after installation?

Run a sequential benchmark such as CrystalDiskMark; the drive should report speeds near 561MB/s read and 452MB/s write on a SATA 6Gb/s port.

Does the 256GB MLC SSD ship with a mounting bracket, screws or cloning software?

The package contains only the 2.5" 7mm drive; brackets, screws and software must be purchased separately.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.