Bitspower
Bitspower Chamfer Brass Hard Tubing OD16mm Carbon Black 500mm 4pcs
Carbon-black brass tubing with 16 mm outer diameter and 0.7 mm wall thickness, pre-cut to 500 mm lengths in a four-piece pack
- TypeAccessories
- Precise 16 mm outer diameter fits Bitspower OD16mm fittings
- Pre-chamfered ends let you cut to length without extra tools
- High-quality brass construction delivers durable strength
- Double tube thickness with 0.7 mm wall resists deformation
- Four 500 mm carbon-black tubes in one pack
Brass hard tubing for custom loops
This pack contains four straight lengths of 16 mm outer-diameter brass tube finished in carbon black. Each piece measures 500 mm and is designed for builders assembling rigid-tube liquid-cooling circuits. The double wall thickness adds structural rigidity for clean bends. RoHS compliance confirms restricted-substance limits are met.
Thermal behaviour and flow characteristics
Brass conducts heat efficiently, so the tubing itself does not create a thermal bottleneck in typical coolant temperatures. The smooth internal bore keeps flow restriction low, allowing standard D5 or DDC pumps to maintain target flow rates without audible turbulence. No active cooling or power draw is introduced by the tubing.
Bundled items and preparation notes
The package supplies only the four pre-cut tubes; fittings, cutting tools and bending accessories are sold separately. Bitspower recommends using its OD16 mm hard-fitting series and the dedicated BP-CMMTC metal tubing cutter to prevent damage to the carbon-black coating during cutting and chamfering. Builders must cut each length to final size and deburr before installation.
Highlights
- Precise 16 mm outer diameter fits Bitspower OD16mm fittings
- Pre-chamfered ends let you cut to length without extra tools
- High-quality brass construction delivers durable strength
- Double tube thickness with 0.7 mm wall resists deformation
- Four 500 mm carbon-black tubes in one pack
Specifications
| Type | Accessories |
|---|
Questions about this item
How do I install the 16 mm OD brass tubing without damaging the carbon black finish?
Cut each 500 mm length to size, then use the Bitspower BP-CMMTC metal tubing cutter to create a clean chamfer; other cutters can crack the coating.
What maintenance will the 0.7 mm wall tubing need over time?
Inspect the carbon black surface periodically for scratches or corrosion; if the finish is breached, replace the affected length to prevent leaks.
At what point does the double-thickness brass limit sustained pressure or heat?
The 0.7 mm wall and brass construction set the practical pressure and temperature ceiling; stay within the fitting manufacturer's rated limits for OD16 mm hard tube.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
