We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bitspower brass 90 degree dual rotary G1/4 fitting

Bitspower

Bitspower BP-TB90DRIG14 90 Degree Dual Rotary G1/4" Female Fitting

SKU CH-HE98-NAAF3 MPN BP-TB90DRIG14

G1/4" female-to-female extender with 90-degree dual rotary ends for flexible liquid-cooling routing

  • TypeFittings
  • True Hi-Flow design maximises coolant throughput
  • 90 degree dual rotary ends simplify tight routing
  • G1/4" female threads fit standard water-cooling parts
  • Hidden O-ring design seals without visible rings
  • True brass construction resists corrosion and wear

G1/4" Female-to-Female 90° Dual Rotary Fitting

This Bitspower fitting connects two G1/4" male threads at a right angle. It is built for custom liquid-cooling loops where space is tight and tubing runs must turn sharply. The dual rotary ends let each side spin independently so the final orientation can be set without stress on the threads.

Thermals Noise and Power

As a passive brass component the fitting adds no heat, noise or electrical draw to the system. Its true hi-flow internal channel keeps restriction low so pump performance is unaffected. The hidden O-ring design seals reliably under normal operating pressures without extra clamping force.

Deciding Specification

The critical detail is the 90 degree dual rotary geometry combined with G1/4" female threads on both ends. If your build needs a straight coupler, a different angle or male threads this part will not fit. Buyers who need a straight extender or a single rotary joint should look elsewhere.

Highlights

  • True Hi-Flow design maximises coolant throughput
  • 90 degree dual rotary ends simplify tight routing
  • G1/4" female threads fit standard water-cooling parts
  • Hidden O-ring design seals without visible rings
  • True brass construction resists corrosion and wear

Specifications

TypeFittings

Questions about this item

How do I install the dual-rotary G1/4" fitting without stressing the O-rings?

Hand-tighten each rotary end until the hidden O-ring seats, then give a light quarter-turn with a soft wrench; over-tightening crushes the seal and causes leaks.

What maintenance will the brass fitting and its hidden O-rings need over time?

Inspect the O-rings annually for hardening or cracking; replace them with standard G1/4" seals if they lose elasticity, and wipe the brass body with a damp cloth to prevent oxidation.

At what point does the 90-degree dual-rotary design restrict flow in a sustained high-flow loop?

The sharp 90° bend becomes the primary restriction when pump pressure exceeds the fitting's hi-flow capacity, creating turbulence that limits maximum sustained flow rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.