We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular thermal printhead with metal housing and connector pins

bitmain

bitmain GH000771A Printhead for Sato CL412e 300dpi

SKU CH-DT2C-YGBFC

Genuine SATO 300 dpi thermal printhead for CL412 and CL412E label printers, part GH000771A

  • Product TypePrinthead
  • Genuine Sato part ensures reliable barcode printing
  • 300 dpi resolution delivers sharp label output
  • Designed for CL412 and CL412E models
  • Includes one thermal printhead ready to install
  • Backed by three-month manufacturer warranty

Genuine 300dpi Printhead for Sato CL412e

This genuine SATO printhead carries part number GH000771A and is built for the CL412 and CL412E thermal label printers operating at 300dpi. It serves operations that need a direct replacement to restore sharp barcode and text output on existing hardware. Buyers who need a different resolution or a head for another printer series cannot use this part.

Thermal performance in normal use

The assembly is engineered to match the original thermal profile of the CL412e so heat output and power draw remain consistent with the printer’s design. Normal operation produces the same acoustic signature as the factory head because no fan or cooling change is introduced. Shops that require a lower energy footprint or silent running beyond the stock specification will not gain those benefits here.

What the bundle changes

The package supplies one genuine thermal print head and a three month warranty, giving immediate fitment without sourcing extra cables or mounting hardware. Installing the head restores the printer’s native 300dpi clarity for labels and barcodes. Users who expect bundled cleaning kits, firmware tools or extended coverage must obtain those separately.

Highlights

  • Genuine Sato part ensures reliable barcode printing
  • 300 dpi resolution delivers sharp label output
  • Designed for CL412 and CL412E models
  • Includes one thermal printhead ready to install
  • Backed by three-month manufacturer warranty

Specifications

BrandSATO
Part NumberGH000771A
Product TypePrinthead

Questions about this item

How do I install the GH000771A printhead in my Sato CL412e and what step is often missed?

Power off the printer, open the printhead latch, remove the old head, align the new GH000771A with the guide pins, seat it firmly, close the latch, then run a calibration print to set the 300dpi alignment.

What maintenance or replacement will the GH000771A need later?

Clean the printhead with isopropyl alcohol and a lint-free swab after every ribbon roll; replace the head when print quality degrades or after the rated 112 km of thermal transfer use.

What limit appears first during sustained printing with this 300dpi head?

The thermal elements reach their maximum duty cycle first, causing temporary print fade until the head cools, especially at high 300dpi density on continuous label runs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.