We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black clamp-on microphone stand with 13 inch flexible gooseneck and adjustable clamp base

BITBLURHYT 22448691 Gooseneck Microphone Stand 13" Clamp-On

SKU CH-HRDQ-B6HSF

A 13-inch flexible gooseneck microphone arm clamps to desks, podiums or tripods and holds up to 1.0 lb

  • Length13 inches
  • SpecificationMic Stand, no, 13 inches
  • FeatureMic Stand
  • Dimension9.1948 cm x 11.303 cm x 17.1958 cm
  • Adjustable clamp fits surfaces from .591 to .97 in for secure mounting on desks, poles or tripods
  • 13 in flexible gooseneck bends to any angle for precise microphone positioning
  • Steel-wire core with .4 in diameter and silicone cover supports up to 1.0 lb load
  • Silicone pads on clamp protect furniture from scratches while improving grip
  • Four cable ties included for tidy cable management during speeches or performances

13" Gooseneck Mic Stand for Clamp Mounting

This 13-inch flexible gooseneck microphone stand clamps onto desks, podiums, chairs and tripods. The adjustable clamp accepts surfaces from .591 to .97 inches thick. It supports microphones up to 1.0 lb. The steel-wire core is wrapped in a .4 inch silicone sleeve for comfortable positioning. Four cable ties are included for tidy cable routing.

Thermals Noise and Power Draw

As a passive mechanical mount the stand generates no heat and draws no power. The ABS clamp base and silicone pads operate silently during use. No fans or active cooling are present. The structure adds negligible thermal load to any environment.

13-Inch Gooseneck Length and 1.0 lb Load Limit

The 13-inch (33 cm) gooseneck determines reach and positioning flexibility. Maximum load capacity is 1.0 lb. Heavier microphones or boom arms will exceed this limit. Buyers needing longer reach or higher weight capacity should choose a different stand.

Highlights

  • Adjustable clamp fits surfaces from .591 to .97 in for secure mounting on desks, poles or tripods
  • 13 in flexible gooseneck bends to any angle for precise microphone positioning
  • Steel-wire core with .4 in diameter and silicone cover supports up to 1.0 lb load
  • Silicone pads on clamp protect furniture from scratches while improving grip
  • Four cable ties included for tidy cable management during speeches or performances

Specifications

BrandBITBLURHYT
Model22448691
Part Number22448691
Length13 inches
SpecificationMic Stand, no, 13 inches
FeatureMic Stand
Dimension9.1948 cm x 11.303 cm x 17.1958 cm

Questions about this item

How do I clamp the 13" gooseneck stand to a desk without scratching it?

Open the adjustable clamp until the jaws clear the surface, slide it on, then tighten the knob until the silicone pads grip firmly. The clamp accepts thicknesses from .591 to .97 in, so verify your desk edge falls in that range before forcing it.

What part of the 13" gooseneck stand is most likely to need replacement after heavy use?

The .4 in steel-wire gooseneck with its silicone sleeve can develop permanent bends or surface wear after repeated repositioning, while the ABS clamp base and silicone pads may loosen or degrade over time.

At what microphone weight does the 13" gooseneck start to sag during a long session?

The gooseneck is rated for a max load of 1.0 lb; exceeding that — even slightly — will cause the arm to droop gradually, especially when bent horizontally.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.