Bipra
Bipra PG2355I 5MP PoE Turret Camera 2 in 1 accessory
A 5 MP PoE turret camera with 105° view, IP67 housing, 30 m IR night vision and 98 % accurate person/vehicle detection
- Sharp 5MP video at 30fps with 2592×1944 resolution
- Single PoE cable delivers power and data for simpler installs
- Person and vehicle detection alerts with 98% accuracy
- IP67 rated housing withstands dust and 1m water immersion
- 8mm lens gives 105° wide-angle coverage day and night
5MP PoE Turret Camera Accessory
The Bipra PG2355I is a new 2-in-1 accessory built around a 5MP PoE turret camera for outdoor security. It delivers ultra HD 2592x1944 resolution at 30 fps through a 1/2.8-inch OV CMOS sensor and a 2.8 mm fixed lens with a 105-degree viewing angle. Power and data travel over a single Ethernet cable to simplify installation.
Installers wanting PoE simplicity and smart alerts
This unit suits installers who want a single-cable PoE deployment with person and vehicle detection rated at up to 98 percent accuracy. Audio capture via a built-in microphone adds context to events. Buyers who need wireless connectivity, local storage slots, or pan-tilt-zoom control should look at other form factors because this fixed turret lacks those features.
5MP resolution at 2592x1944 pixels
The defining specification is the 5MP sensor producing 2592x1944 video at 30 frames per second. This resolution sits above 4MP 2560x1440 and determines the detail level for identification tasks. If the project requires higher pixel counts or different aspect ratios, this camera will not meet that threshold.
Highlights
- Sharp 5MP video at 30fps with 2592×1944 resolution
- Single PoE cable delivers power and data for simpler installs
- Person and vehicle detection alerts with 98% accuracy
- IP67 rated housing withstands dust and 1m water immersion
- 8mm lens gives 105° wide-angle coverage day and night
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the PG2355I camera using a single Ethernet cable, and what step do people often miss?
Connect the camera to a PoE switch or injector with one Ethernet cable for both power and data; the step often missed is verifying the switch delivers enough PoE power for the 5MP turret before mounting.
What maintenance or replacement will the PG2355I need over time?
The IP67-rated housing resists dust and water immersion up to 1 m for 30 minutes, so only periodic lens cleaning and checking cable seals are required; no internal user-serviceable parts are specified.
What limit appears first during sustained 30 fps 5MP recording on the PG2355I?
Continuous 30 fps at 2592 x 1944 resolution demands steady PoE bandwidth and NVR write speed; the first bottleneck is typically network or storage throughput rather than the camera sensor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



