We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Adjustable RGB GPU support stand with temperature display, 35 to 157mm height

Bipra

Bipra Height Adjustable RGB GPU Stand with Temperature Display 35-157mm 2 in 1 accessory

SKU CH-1GFT-SQHMH

An adjustable GPU support bracket with real-time temperature display and ARGB infinity lighting, fitting cards from 35 to 157 mm high

  • Monitor GPU health with real-time temperature display
  • Sync vibrant ARGB infinity lighting via 5V 3PIN connector
  • Adjust support height from 35 to 157mm for any card
  • Prevent graphics card sag with sturdy anti-sag bracket
  • Secure placement using magnetic base on any chassis

Adjustable GPU Support Stand

The Bipra GPU stand prevents graphics card sag with an adjustable support arm that extends from 35mm to 157mm. A built-in digital display shows real-time GPU temperature so you can monitor thermals at a glance. Addressable RGB lighting with an infinity mirror effect connects via a standard 5V 3-pin header for synchronisation with compatible motherboard software. The magnetic base secures the stand to the case floor without screws.

PC builders who want sag protection

This accessory suits anyone installing a heavy graphics card that needs extra support and likes seeing live temperature data inside the case. The 5V 3-pin ARGB connector requires a compatible header on the motherboard or a separate controller; systems without that header cannot control the lighting. Buyers who only need a simple fixed bracket or who have no ARGB header should look at simpler supports.

Height range 35mm to 157mm

The adjustable support arm covers a 35mm to 157mm range, which determines whether the stand can reach your specific graphics card. Measure the gap between your motherboard PCIe slot and the case floor or power-shroud top; if that distance falls outside this range the stand will not fit. No other specification affects compatibility as directly as this vertical adjustment limit.

Highlights

  • Monitor GPU health with real-time temperature display
  • Sync vibrant ARGB infinity lighting via 5V 3PIN connector
  • Adjust support height from 35 to 157mm for any card
  • Prevent graphics card sag with sturdy anti-sag bracket
  • Secure placement using magnetic base on any chassis

Specifications

No published specifications for this item yet.

Questions about this item

How do I pick the right height setting between 35mm and 157mm?

Measure the gap from your motherboard PCIe slot to the side panel, then extend the stand until the support arm sits snugly under the graphics card backplate within that 35-157mm range.

What does the on-board temperature display actually show?

It reads the GPU core temperature in real time via the sensor cable you plug into the card, giving an instant digital readout so you can spot thermal throttling at a glance.

How does the 5V 3-pin ARGB connector limit lighting control?

It ties the infinity-mirror LEDs to your motherboard's 5V ARGB header, so colours and effects are managed through the board's own RGB software rather than a separate controller.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.