We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12AWG power cable with C20 and P13 connectors, 150cm length

Bipra

Bipra C20 to P13 Power Cable 12AWG 150cm 2 in 1 accessory

SKU CH-RFTK-Q077Q

A 12AWG cable linking a C20 inlet to the Antminer P13 4-pin connector, 150 cm long and rated 220 V 15 A

  • Designed for Antminer S21 and S19jXP miners
  • 12AWG cable supports 15A at 220V
  • 150cm length fits standard rack setups
  • P13 4-pin connector matches APW17 PSU requirement
  • IEC C20 plug connects to common PDU outlets

Power Cable for Antminer APW17 PSU

This 12AWG cable connects an IEC C20 inlet to the PA45/P13 4-pin plug used by the Antminer APW17 power supply. It is built for miners running Bitmain hardware such as the L9 AL1pro AL1 S21 S21XP S21Pro S19jXP KS5 KS5pro models. The 150 cm length gives flexible routing inside a rack or frame. Rated for 220 V and 15 A input current.

Suited for ASIC miners using the APW17 supply

Operators who need a replacement or spare lead for the listed Antminer units will find the correct P13 connector here. Builders using older 17 series or 19 series power supplies should look elsewhere because those models use a different plug type. The cable is not intended for general PC or server equipment that relies on standard C13 or C19 connectors.

Verify PSU connector and voltage before ordering

Confirm that your power supply is the APW17 unit with a C20 outlet and that the miner side requires the PA45/P13 4-pin male connector. Ensure the installation environment can deliver 220 V at up to 15 A. Check that the 150 cm reach matches the distance between your PDU and the miner chassis.

Highlights

  • Designed for Antminer S21 and S19jXP miners
  • 12AWG cable supports 15A at 220V
  • 150cm length fits standard rack setups
  • P13 4-pin connector matches APW17 PSU requirement
  • IEC C20 plug connects to common PDU outlets

Specifications

No published specifications for this item yet.

Questions about this item

What power supply must I already have to use this C20-to-P13 cable?

You need an Antminer APW17 PSU with an IEC C20 outlet to connect the cable's C20 plug.

Will this cable fit the P13 port on my older S17 or S19 series miner?

No, the PA45/P13 4-pin connector is different from the 17 and 19 series plugs and will not mate with those miners.

How can I confirm the cable is delivering power correctly after I connect it?

The miner should power on and report a stable 220 V input with current draw up to 15 A through the 12 AWG conductors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.