We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Long thin black fiber-optic HDMI cable with labelled source and display plugs, coiled to show 100ft length

Bipra

Bipra 8K 60Hz 4K 120Hz HDMI 2.1 Fiber Optic Cable 100ft

SKU CH-4QAT-0YAD0

A 100 ft fiber-optic HDMI 2.1 cable carrying 48 Gbps for 8K at 60 Hz or 4K at 120 Hz with eARC and VRR support

  • 8K@60Hz and 4K@120Hz support for ultra-clear video
  • 48Gbps bandwidth enables uncompressed high-speed data transfer
  • Fibre-optic core eliminates electromagnetic interference over long runs
  • Unidirectional design with marked source and display ends
  • Backward compatible with HDMI 2.0b/2.0a/1.4/1.3/1.2/1.1

100 ft 8K 60 Hz HDMI 2.1 fiber cable

This 100 ft fiber-optic HDMI cable carries 8K at 60 Hz and 4K at 120 Hz without compression or latency. It supports 48 Gbps bandwidth and is backward compatible with HDMI 2.0 and earlier versions down to 1.1. The unidirectional design requires the source and display ends to be connected correctly. It suits installers who need long runs for high-resolution video and eARC audio.

Replaces copper HDMI at long distance

Copper HDMI cables lose signal integrity well before 100 ft at 48 Gbps, forcing compression or lower refresh rates. This fiber cable removes that limit, so the jump is worth it when the run exceeds typical copper reach and 8K 60 Hz or 4K 120 Hz must be preserved. It is not for runs short enough that a passive copper cable meets the same specification.

Fits source-to-display runs with fixed routing

The cable connects a source device such as a PC, console or streamer to a display or AV receiver. Its fiber core is immune to electromagnetic interference, freeing the installer from routing constraints near power cables. The cable must not be bent sharply because excessive force can fracture the fiber core and break the link. It requires no external power and adds no active electronics at the display end.

Highlights

  • 8K@60Hz and 4K@120Hz support for ultra-clear video
  • 48Gbps bandwidth enables uncompressed high-speed data transfer
  • Fibre-optic core eliminates electromagnetic interference over long runs
  • Unidirectional design with marked source and display ends
  • Backward compatible with HDMI 2.0b/2.0a/1.4/1.3/1.2/1.1

Specifications

No published specifications for this item yet.

Questions about this item

What physical clearance does the 100ft fiber optic HDMI cable need to avoid damaging the core?

The fiber core will break if subjected to big external force or forceful bending, so avoid tight bends and heavy pressure along the 100ft run.

How do I install the unidirectional cable correctly, and what step do people often reverse?

Connect the end marked SOURCE to the signal source such as a laptop or PC, and the end marked DISPLAY to the display; reversing them breaks the link.

What long-term care does the optical fiber core require?

Prevent the fiber core from breaking by never forcefully bending the cable and protecting it from heavy external force during and after installation.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.