Bipra
Bipra 25GBASE-LR SFP28 1310nm 10km DDM Duplex LC SMF 2 in 1 accessory
25G SFP28 transceiver delivers 10 km reach at 1310 nm with DDM diagnostics and 1.2 W max power
- 25 Gbps throughput for high-speed 25GBASE-LR links
- 10 km reach over 1310 nm single-mode fibre
- Real-time DDM diagnostics for link health monitoring
- Hot-pluggable SFP28 MSA design simplifies maintenance
- Low 1.2 W power draw extends module service life
25GBASE-LR SFP28 Transceiver
This 25GBASE-LR SFP28 optical transceiver module operates at 1310nm for distances up to 10km over duplex LC single-mode fibre. It supports 25GBASE and CPRI option10 line rates with a maximum power draw of 1.2W. The module is built for commercial temperature ranges from 0 to 70C.
Hot-pluggable SFP28 MSA installation
The hot-pluggable SFP28 MSA form factor allows insertion or removal without powering down the host switch, simplifying maintenance and maximising uptime. RoHS compliance ensures restricted substances are absent. Digital diagnostic monitoring provides real-time optical parameters for quick fault isolation. The main installation risk is contaminating the LC connector end-faces; always clean with a lint-free wipe and isopropyl alcohol before mating.
Pre-deployment compatibility checks
Verify that the target switch port accepts SFP28 modules coded for the intended vendor ecosystem; the supplier tests EEPROM coding in a compatibility lab for brands such as HPE Aruba JL486A. Confirm the link budget matches a 10km 1310nm single-mode path and that the host supports IEEE 802.3by or IEEE 802.3cc 25GBASE-LR operation. Ensure the chassis can dissipate 1.2W per module within the 0 to 70C ambient range. Buyers needing multimode reach or wavelengths other than 1310nm should select a different module.
Highlights
- 25 Gbps throughput for high-speed 25GBASE-LR links
- 10 km reach over 1310 nm single-mode fibre
- Real-time DDM diagnostics for link health monitoring
- Hot-pluggable SFP28 MSA design simplifies maintenance
- Low 1.2 W power draw extends module service life
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the Bipra 25GBASE-LR SFP28 module is operating correctly after installation?
Check the host switch for a solid link light and use the built-in Digital Diagnostic Monitoring (DDM) to confirm real-time optical power and temperature readings stay within the 0 to 70 °C commercial range and expected 1310 nm levels.
What comes with the Bipra 25GBASE-LR SFP28 transceiver and what must I purchase separately?
The module itself is supplied; you must source compatible duplex LC single-mode fibre patch cables and ensure the target switch or router has an open SFP28 port coded for 25GBASE-LR or CPRI option 10 operation.
Which version of the Bipra 25GBASE-LR SFP28 should I choose for a 10 km HPE Aruba JL486A link?
Select this 1310 nm 10 km DDM Duplex LC SMF model; it is coded for HPE Aruba JL486A compatibility and supports both 25.78 Gbps 25GBASE and 24.33 Gbps CPRI option 10 rates over the required distance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
