We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two aqua duplex fiber patch cables with LC connectors on both ends, 49ft each, LSZH jacket

Bipra

Bipra 2 in 1 accessory LC to LC OM3 multimode duplex fiber patch cable 49ft 15m 2pack

SKU CH-65ME-N5BP1

Two 49 ft OM3 duplex cables with LC connectors support 10G, 40G and 100G Ethernet over 50/125 µm multimode fibre

  • Supports 10G Ethernet up to 400m with OM3 4700 MHz·km bandwidth
  • Handles 40G Ethernet up to 350m and 100G Ethernet up to 125m at 850nm
  • LSZH jacket reduces toxic smoke for safer data-center and telecom-room deployments
  • Duplex LC connectors fit 10G SR, 40G BIDI SR, QSFP+ and SFP+ transceivers
  • Two 15m cables provide 50/125µm multimode fiber with 2.0mm diameter for high-density cabling

Two-pack OM3 LC duplex fiber cable

This two-pack supplies two 49ft OM3 multimode duplex patch cables with LC connectors on both ends. Each cable uses 50/125µm fiber and a 2.0mm LSZH jacket rated for 850/1300nm operation. The pair is aimed at installers building 10G, 40G or 100G Ethernet links in data centres, enterprise networks or telecom rooms.

Sustained bandwidth over distance

The OM3 rating provides 4700 MHz·km bandwidth at 850nm, supporting 10GbE up to 400m, 40GbE up to 350m and 100GbE up to 125m. LSZH sheathing limits smoke and halogen emission during prolonged exposure to heat, making the cables suitable for dense rack runs where airflow is restricted and fire codes apply.

Verify transceiver and patch-panel compatibility

Confirm that your SFP+, QSFP+ or 10G/40G/100G SR transceivers present LC duplex interfaces and accept OM3 multimode fibre. Check that patch panels and cable managers accommodate 2.0mm duplex cords without exceeding bend-radius limits. Ensure the 49ft length fits the planned route without slack coils that could degrade signal integrity.

Highlights

  • Supports 10G Ethernet up to 400m with OM3 4700 MHz·km bandwidth
  • Handles 40G Ethernet up to 350m and 100G Ethernet up to 125m at 850nm
  • LSZH jacket reduces toxic smoke for safer data-center and telecom-room deployments
  • Duplex LC connectors fit 10G SR, 40G BIDI SR, QSFP+ and SFP+ transceivers
  • Two 15m cables provide 50/125µm multimode fiber with 2.0mm diameter for high-density cabling

Specifications

No published specifications for this item yet.

Questions about this item

How much heat or power does the OM3 duplex cable draw when it runs continuously?

The passive fiber patch cable carries light instead of electricity, so it generates no heat and draws no power during all-day operation.

What transceivers must I already own for the LC duplex connectors to work?

You need 10G SR, 40G BIDI SR, QSFP+ or SFP+ transceivers with LC ports to plug the cables into.

Will the 50/125 µm OM3 cable reach the 400 m 10G limit on my older 850 nm gear?

Yes, the 4700 MHz·km bandwidth supports 10G up to 400 m, 40G up to 350 m and 100G up to 125 m at 850 nm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.