We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat5e riser cable on white pull box, 1000ft spool

Bipra

Bipra 2 in 1 accessory Cat5e Riser 1000ft Blue 24AWG 350MHz PoE++

SKU CH-2CJ1-HZ82B

Blue Cat5e riser cable, 1000 ft of 24 AWG solid bare copper, tested to 350 MHz for 2.5 GbE up to 328 ft with PoE++ up to 100 W

  • Supports 2.5Gb speeds up to 328ft with 350MHz bandwidth
  • Delivers up to 100W via PoE++ for power-hungry devices
  • Pure bare copper conductors ensure stronger, more reliable signals
  • 1000ft tangle-free pull box speeds up installation time
  • CMR jacket limits flame spread for safer in-wall runs

Indoor Riser Cable

This Cat5e riser cable is built for in-wall and between-floor runs where mild flame retardance is required. The blue jacket identifies it for indoor vertical installations in non-plenum spaces. It suits installers and network builders who need a bulk supply for structured cabling projects.

Solid Copper Upgrade

The 24 AWG solid bare copper conductors replace copper-clad aluminium alternatives that can degrade signal quality over distance. Pure copper delivers stronger conductivity and better PoE current handling for reliable device power. The jump is worth it when cable runs approach the 328 foot limit for 2.5GBASE-T or when 100W PoE++ loads are present.

350 MHz Headroom

Bandwidth is tested to 350 MHz, providing margin above the Cat5e baseline for 1 and 2.5 Gigabit speeds up to 328 feet. The 1000 foot spool yields multiple drops from a single box, and the easy-pull packaging reduces snagging during long pulls. Runs beyond 328 feet or plenum-rated spaces fall outside the rated use case.

Highlights

  • Supports 2.5Gb speeds up to 328ft with 350MHz bandwidth
  • Delivers up to 100W via PoE++ for power-hungry devices
  • Pure bare copper conductors ensure stronger, more reliable signals
  • 1000ft tangle-free pull box speeds up installation time
  • CMR jacket limits flame spread for safer in-wall runs

Specifications

No published specifications for this item yet.

Questions about this item

What conduit diameter does the 24 AWG 4-pair solid copper cable with riser-rated jacket require?

The 24 AWG 4-pair solid bare copper conductors with blue riser-rated jacket need conduit sized for eight insulated wires plus the outer jacket; check local code for fill ratios.

Which step is often missed when pulling the 1000 ft cable from the easy-pull box for a 328 ft PoE++ run?

Pull only the length needed — up to 328 feet for 2.5GBASE-T — and avoid kinking the solid copper pairs; the box is designed for tangle-free dispensing.

When should the riser-rated jacket be inspected or the cable replaced after a 100W PoE++ installation?

Inspect the blue riser jacket after any fire event or physical damage; the solid bare copper and ETL listing mean no scheduled replacement under normal indoor use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.