We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 7-pin to 2-pin power cable with rotatable 90-degree connector, 45cm length

Bipra

Bipra 2 in 1 accessory 7-pin to 2-pin power cable 45cm rotatable 90-degree

SKU CH-SH8K-RT5DD

A 45 cm rotatable 90-degree cable powers a Tilta Nucleus-M focus motor from a 12 V 2-pin Z-CAM or ARRI Alexa source

  • Powers TILTA Nucleus-M focus from Z-CAM 12V 2-pin source
  • 45 cm cable length suits compact rig builds
  • Rotatable 90-degree connector adjusts to your preferred cable exit
  • Exits left-rear on Z-CAM E2-F6 F8 S6 for tidy routing
  • Compatible with ARRI Alexa XT and Classic cameras

Product Identity

This Bipra 2 in 1 accessory is a 7-pin to 2-pin power cable designed to draw 12V power from Z-CAM E2-F6, E2-F8 and E2-S6 cameras for Tilta Nucleus-M focus systems. It also supports ARRI Alexa XT and Classic cameras, serving camera operators who need a single cable for multiple professional bodies.

Cable Geometry

The 45cm cable features a rotatable 90-degree connector that can be unscrewed and reoriented to the required direction. When attached to a Z-CAM E2 series camera the cable exits from the left side of the rear panel, reducing strain and keeping the rig tidy during handheld or gimbal work.

Build Integration

The cable eliminates the need for a separate battery plate or D-tap adapter on the focus motor, freeing space on the camera cage and reducing overall weight. It requires a compatible 12V 2-pin output on the camera body and a 7-pin input on the focus controller, so operators must confirm both ports are present before rigging.

Highlights

  • Powers TILTA Nucleus-M focus from Z-CAM 12V 2-pin source
  • 45 cm cable length suits compact rig builds
  • Rotatable 90-degree connector adjusts to your preferred cable exit
  • Exits left-rear on Z-CAM E2-F6 F8 S6 for tidy routing
  • Compatible with ARRI Alexa XT and Classic cameras

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the rotatable 90-degree connector and which step is often missed?

Plug the 2-pin end into the Z-CAM E2-F6, E2-F8 or E2-S6 12V port, then connect the 7-pin end to the TILTA Nucleus-M. Loosen the set screw before rotating the 90-degree housing to the desired angle, then tighten it again — the step people skip is re-tightening the screw after positioning.

What maintenance or replacement will this cable need over time?

Inspect the 45cm cable jacket and both connectors for wear after heavy production use; replace the cable if the 2-pin or 7-pin contacts become loose, corroded or if the rotatable joint no longer holds its angle securely.

What is the first limit that appears during sustained use?

The 12V supply from the Z-CAM E2-F6, E2-F8 or E2-S6 camera is the limiting factor; if the camera’s 2-pin output cannot maintain 12V under continuous draw, the TILTA Nucleus-M will lose power before the cable itself fails.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.