We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black armored fiber cable with ST connectors and pulling eye, 125m outdoor duplex patch cord

Bipra

Bipra 2 in 1 accessory 125m outdoor armored ST fiber

SKU CH-02ZT-0PBE6

Outdoor armored ST-to-ST single-mode fiber patch cable, 125 m duplex with pulling-eye kit, steel spiral armor, TPU jacket rated -40 °C to +85 °C, 600 N tensile and 3000 N crush strength

  • Operates from -40 °C to +85 °C for extreme environments
  • Stainless steel spiral armor shields core from rodent damage
  • G.657.A2 bend-insensitive fiber with 7.5 mm minimum bend radius
  • 600 N tensile and 3000 N compression strength resists crushing
  • Pulling eye kit on one end protects connectors during installation

Bipra 125m Armored Fiber Cable

This Bipra accessory is a 125-meter single-mode fiber patch cable with ST connectors on both ends. It is built for installers and network engineers who need a durable outdoor link for campus, industrial or direct-burial runs. The duplex armored construction protects the glass core in harsh environments.

Extreme Temperature and Crush Resistance

The industrial TPU jacket operates from -40°C to +85°C and resists UV, water, oil and abrasion. A stainless-steel spiral armor tube shields the core from rodents and impact, surviving up to 3000N of compression. The G.657.A2 bend-insensitive fiber tolerates a 7.5mm minimum bend radius without signal loss.

Pulling Eye Kit for Direct Burial

A pre-terminated pulling eye on one end protects the connectors during duct pulls and trench installation. The cable handles 600N of tensile load and is rated for 3-5 years of continuous outdoor exposure. It frees the installer from field termination and suits routes where conduit space is tight or rodent risk is high.

Highlights

  • Operates from -40 °C to +85 °C for extreme environments
  • Stainless steel spiral armor shields core from rodent damage
  • G.657.A2 bend-insensitive fiber with 7.5 mm minimum bend radius
  • 600 N tensile and 3000 N compression strength resists crushing
  • Pulling eye kit on one end protects connectors during installation

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 125 m armored ST fiber cable without damaging the connectors during the pull?

Use the pre-installed pulling eye kit on one end to guide the cable through conduit or trenches; the eye absorbs tension so the ST ferrules never take the 600 N tensile load.

What maintenance or replacement should I expect after several years outdoors?

The TPU jacket is rated for 3 to 5 years of continuous UV, moisture and temperature cycling from -40 °C to +85 °C; plan to inspect for jacket cracking or rodent damage after that period.

What is the first mechanical limit I will hit if the cable is bent tightly during a long run?

The G.657.A2 fiber has a minimum bend radius of 7.5 mm; exceeding that radius will increase attenuation before the stainless-steel armor or TPU jacket shows any stress.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.