Binks
Binks 83C-210 2.8 gal paint tank
A 2.8 gallon zinc-plated steel paint tank rated to 80 psi with a polyethylene liner and regulator for solvent-borne coatings
- ColorTransparent
- 8 gallon capacity handles large coating jobs
- Zinc-plated steel tank withstands 80 psi operating pressure
- Polyethylene liner resists solvent-borne coating chemicals
- 1/4 in NPS air and 3/8 in NPS paint connectors simplify hookup
- Integrated regulator maintains consistent fluid delivery
2.8 gal paint tank
The Binks 83C-210 is a 2.8 gal paint tank built for industrial solvent-borne coatings. Its zinc-plated steel body and included polyethylene liner resist corrosion during extended use. The unit ships with a regulator for controlled delivery.
80 psi capacity and headroom
Maximum working pressure reaches 80 psi, giving enough headroom for most spray applications with solvent-borne materials. Pressure drops become noticeable when the regulator is pushed toward its upper limit on long runs. The 2.8 gal volume supports continuous spraying without frequent refills.
1/4 in NPS air and 3/8 in NPS paint connections
The tank connects to a compressed air supply through a 1/4 in NPS air line fitting and feeds the gun via a 3/8 in NPS paint line connector. Standard shop fittings mate directly without adapters. The integrated regulator frees the operator from adjusting pressure at the compressor.
Highlights
- 8 gallon capacity handles large coating jobs
- Zinc-plated steel tank withstands 80 psi operating pressure
- Polyethylene liner resists solvent-borne coating chemicals
- 1/4 in NPS air and 3/8 in NPS paint connectors simplify hookup
- Integrated regulator maintains consistent fluid delivery
Specifications
| Brand | BINKS |
|---|---|
| Color | Transparent |
Questions about this item
Will the 1/4 in NPS air line connector on the 83C-210 fit my existing compressor hose?
The tank uses a 1/4 in NPS air line connector; match it to your hose fitting or use an appropriate adapter for a secure connection.
How do I verify the 83C-210 is holding the rated 80 psi after setup?
Pressurise the tank and watch the included regulator gauge; it should read up to 80 psi and remain steady without dropping.
Does the 83C-210 come with the polyethylene liner and regulator, or must I buy them separately?
The tank includes both a polyethylene liner and a regulator in the box; no separate purchase is required for those items.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
