Binks
Binks 2465-14LV-23S0 Conventional Spray Gun Medium Pressure 1.4 mm Nozzle 10.6 cfm
A conventional spray gun for medium-pressure industrial coatings with a 1.4 mm nozzle and 10.6 cfm air consumption
- TypeBlow Guns, Air Guns & Spray Guns
- Medium pattern covers 8–12 in for broad coverage
- 4 mm nozzle suits medium-viscosity industrial coatings
- 6 cfm at 30 psi matches typical shop compressors
- Hardened stainless steel nozzle resists wear from abrasive materials
- Pressure-feed design enables steady fluid delivery without a cup
Spray Gun for Industrial Coatings
The Binks 2465-14LV-23S0 is a conventional pneumatic spray gun designed for applying industrial coatings. It operates with a fluid delivery type of pressure and features a hardened stainless steel, heat treated fluid nozzle measuring 1.4 mm. The gun consumes 10.6 cfm of air at 30 psi and produces a pattern size ranging from 8 in to 12 in. No cup is included with this unit.
Suited for Pressure-Feed Applications
This tool suits professionals who require a medium-pressure conventional gun for pressure-fed fluid delivery in industrial finishing. It is not for operators needing a gravity-feed or suction-feed configuration, nor for those who require an integrated fluid cup. Buyers looking for a different nozzle diameter or a higher air consumption rating should evaluate alternative models.
Integrates with Compressed Air Systems
The gun connects to a compressed air supply via a 1/4 in air inlet and demands 10.6 cfm at 30 psi for proper atomisation. A pressure-fed fluid source must be plumbed separately to the fluid inlet, freeing the operator from managing a cup. Ensure the air supply can sustain the required volume and pressure for consistent pattern performance.
Highlights
- Medium pattern covers 8–12 in for broad coverage
- 4 mm nozzle suits medium-viscosity industrial coatings
- 6 cfm at 30 psi matches typical shop compressors
- Hardened stainless steel nozzle resists wear from abrasive materials
- Pressure-feed design enables steady fluid delivery without a cup
Specifications
| Type | Blow Guns, Air Guns & Spray Guns |
|---|---|
| Brand | BINKS |
Questions about this item
What air supply do I need to run the 10.6 cfm at 30 psi rating?
You need a compressor that can deliver at least 10.6 cfm at 30 psi to match the gun's stated air consumption.
Can I use my existing 1/4 in air hose with this spray gun?
Yes, the gun has a 1/4 in air inlet so a standard 1/4 in hose will connect directly.
How can I verify the 8 in to 12 in pattern size after setup?
Spray a test panel and measure the wet fan width; it should fall between 8 and 12 inches when the gun is adjusted correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
