Binks
Binks 1466-12LV-B1S Conventional Sprayer 1.2 mm 4 oz
A conventional gravity-feed spray gun with a 1.2 mm nozzle and 4 oz cup for industrial and automotive coatings
- ColorTransparent
- 2 mm nozzle gives precise atomisation for fine finish work
- 4 oz gravity cup feeds material steadily without frequent refills
- 8 cfm at 30 psi air consumption matches typical shop compressors
- 4 in to 6 in pattern width covers panels efficiently
- Hardened stainless steel nozzle resists wear from abrasive coatings
Binks 1466 Conventional Spray Gun
The Binks 1466-12LV-B1S is a conventional spray gun built for industrial and automotive coatings. Its gravity-feed design uses a 4 oz cup and a hardened stainless steel nozzle. The gun delivers a medium fluid speed suited to general finishing work.
Air Consumption and Pattern Limits
The gun draws 7.8 cfm at 30 psi to produce a fan pattern of 4 in to 6 in. A 1.2 mm nozzle controls the material flow for medium-viscosity fluids. Performance depends on a compressed-air supply that can maintain this pressure and volume.
Compressor and Cup Compatibility
Verify that your compressor can sustain 7.8 cfm at 30 psi before ordering. The 1/4 in air inlet must match your hose fitting or an adapter. The 4 oz cup capacity suits smaller jobs; larger projects will require frequent refills.
Highlights
- 2 mm nozzle gives precise atomisation for fine finish work
- 4 oz gravity cup feeds material steadily without frequent refills
- 8 cfm at 30 psi air consumption matches typical shop compressors
- 4 in to 6 in pattern width covers panels efficiently
- Hardened stainless steel nozzle resists wear from abrasive coatings
Specifications
| Brand | BINKS |
|---|---|
| Color | Transparent |
Questions about this item
Which nozzle size suits my coating?
The 1.2 mm nozzle handles medium-viscosity industrial and automotive coatings with a 4 in to 6 in pattern.
What does 7.8 cfm at 30 psi mean for my compressor?
Your compressor must deliver at least 7.8 cfm at 30 psi to keep the gun running without pressure drop.
What does the 1/4 in air inlet limit?
The 1/4 in inlet fits standard shop hoses and caps airflow to what that fitting can pass.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
