We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five rubber expanding drums with assorted sanding sleeves in a storage case

Big Horn

Big Horn 19522 Sanding Drum Set 25 Piece

SKU CH-QE1H-JC3GK

A 25-piece sanding drum set converts a drill press into a spindle sander and fits any 1/4-inch chuck

  • TypeKeepsakes
  • Turns a drill press into a spindle sander
  • 25-piece set covers many sanding tasks
  • Five expanding drums in assorted diameters
  • Fine and coarse sleeves included for finish control
  • Works with any 1/4-inch or larger chuck

Big Horn 19522 Sanding Drum Set 25 Piece

The Big Horn 19522 Sanding Drum Set 25 Piece lets a drill press serve as a spindle sander for woodworking and finishing tasks. It includes five expanding drums and matching abrasive sleeves in both fine and coarse grits. The set works with any drill or drill press fitted with a 1/4 inch or larger chuck. New condition ensures every component is ready for immediate use.

Upgrade from improvised sanding methods

Replaces hand-sanding blocks, flap wheels or makeshift drum arrangements that lack consistent diameter control. The jump is worth it when repeatable curves, internal radii or contoured edges must be produced quickly and uniformly. Builders who only need occasional flat-surface sanding will not benefit from the specialised spindle geometry.

Capacity and headroom for drum sanding

Five drum sizes ranging from 1/2 by 1/2 up to 2 by 1-1/2 cover most common contour radii found in furniture and craft work. Two fine and two coarse sleeve sets per diameter provide enough abrasive life for extended project runs. The set runs out when profiles exceed the largest drum diameter or when a dedicated oscillating spindle sander is required for high-volume production.

Highlights

  • Turns a drill press into a spindle sander
  • 25-piece set covers many sanding tasks
  • Five expanding drums in assorted diameters
  • Fine and coarse sleeves included for finish control
  • Works with any 1/4-inch or larger chuck

Specifications

TypeKeepsakes

Questions about this item

What chuck size is required to hold the 1/4 inch shanks on the Big Horn 19522 drums?

Any drill or drill press with a 1/4 inch or larger chuck will accept the shanks on all five expanding drums in this set.

Which step is often missed when fitting a sanding sleeve onto one of the expanding drums?

The drum must be tightened after the sleeve is slid on so the rubber expands and grips the sleeve; running it loose lets the sleeve spin off.

When do the sanding sleeves in the 25-piece set need to be replaced?

Replace a sleeve when the grit is worn smooth or the cloth backing tears; the set includes two fine and two coarse sleeve sets so you can swap them as they wear.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.