We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Wireless HDMI transmitter and receiver pair with dual antennas, matte black finish, NP-F battery slots and 1/4-inch mount points

BFKK

BFKK Wireless HDMI Extender Kit 2.4G/5.8G 1080P 820FT Loop-Out

SKU CH-R5MB-6ATDT

Transmits 1080p video up to 820 ft with .06 s latency over 2.4/5.8 GHz, includes HDMI loop-out and NP-F or USB-C power options

  • Wireless 1080p video reaches 820 ft open range
  • 06 s latency keeps camera feed in sync
  • Dual 2.4/5.8 GHz bands resist signal interference
  • NP-F 970/750/550 or USB-C power anywhere
  • HDMI loop-out mirrors signal to local monitor

Wireless HDMI Extender Kit 2.4G/5.8G

This kit sends 1080p video at 60Hz up to 820 feet using dual-band 2.4G and 5.8G channels. It targets camera operators, streamers and installers who need a cable-free link from a DSLR, laptop or media player to a monitor or TV.

Sustained 1080p transmission with .06s latency

The link maintains full HD resolution at 60 frames per second with a maximum data rate of 8.5 Gbps. Low latency of .06 seconds stays consistent during long takes, while elevating the units above .7 metres helps preserve range under continuous load.

HDMI loop-out splits the source locally

The transmitter includes an HDMI loop-out that mirrors the incoming signal for a second on-camera display. No software or network configuration is required, so the hard limit is the physical HDMI connection and the 820-foot open-air ceiling of the wireless standard.

Highlights

  • Wireless 1080p video reaches 820 ft open range
  • 06 s latency keeps camera feed in sync
  • Dual 2.4/5.8 GHz bands resist signal interference
  • NP-F 970/750/550 or USB-C power anywhere
  • HDMI loop-out mirrors signal to local monitor

Specifications

No published specifications for this item yet.

Questions about this item

How much power does the transmitter draw when running all day on an NP-F970 battery?

The kit accepts NP-F series batteries (970, 750, 550) and a 5 V / 2 A USB-C supply; four rear LEDs show remaining charge and the fourth flashes on low-battery alarm.

What source device and display connections are required for the loop-out to function?

Connect an HDMI source to the transmitter input and a local monitor to the transmitter HDMI loop-out; the receiver provides a second HDMI output for the remote display.

Will the 1080p 60 Hz signal stay stable at 820 ft if my older camera only outputs 1080i?

The system supports up to 1080p 60 Hz with 0.06 s latency; any HDMI source matching that resolution and frame rate will transmit over the dual-antenna 2.4 G / 5.8 G link.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.