We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small black boxes with HDMI ports and dual antennas, one labelled TX the other RX

BFKK

BFKK Wireless HDMI Extender Kit 1080p 2.4/5.8GHz 200m Loop-Out IR

SKU CH-1DCR-R17ZK

Wirelessly extends 1080p HDMI up to 200 metres on 2.4 and 5.8 GHz with loop-out and IR pass-back

  • Full HD 1080p at 60 Hz for clear, smooth video
  • Plug-and-play setup with no software or drivers required
  • Dual-band 2.4 / 5.8 GHz with external antennas for strong anti-interference
  • IR pass-back and local HDMI loop-out for flexible control and monitoring
  • Scalable to four receivers with line-of-sight ranges up to 200 m

Wireless HDMI extender with loop-out

This BFKK kit sends 1080p video at 60 Hz from a source to a display up to 200 metres away in open space. It operates on 2.4 GHz and 5.8 GHz bands with dual external antennas and includes an IR pass-back channel for remote control relay. A local HDMI loop-out lets the source monitor stay connected.

Replaces long HDMI cable runs

The kit removes the need for costly in-wall cabling between a laptop, camera, Blu-ray player or set-top box and a projector or TV. It is worth the switch when the path exceeds practical cable lengths or when drilling is impossible, such as in churches, rented offices or heritage buildings. One transmitter can pair with up to four receivers for multi-room distribution.

Limited by wireless bandwidth and obstacles

The 5.8 GHz link carries uncompressed 1080p60, but throughput drops as receivers are added: 200 m for one receiver, 60 m for two, 30 m for three. Walls, metal structures and other 5.8 GHz traffic will shorten range further. The IR return path works only with 20–60 kHz remotes, and no 4K or HDR formats are supported.

Highlights

  • Full HD 1080p at 60 Hz for clear, smooth video
  • Plug-and-play setup with no software or drivers required
  • Dual-band 2.4 / 5.8 GHz with external antennas for strong anti-interference
  • IR pass-back and local HDMI loop-out for flexible control and monitoring
  • Scalable to four receivers with line-of-sight ranges up to 200 m

Specifications

No published specifications for this item yet.

Questions about this item

Does the transmitter need two HDMI ports to use the loop-out feature?

The transmitter has one HDMI input and one HDMI loop-out port so a local display can stay connected while the signal is sent wirelessly.

Do I have to pair the transmitter and receiver manually or do they link automatically?

The kit is plug-and-play with no software or pairing steps; power both units and they establish the 2.4/5.8GHz link automatically.

Will the IR extender cable need replacement if I add a third receiver later?

Each receiver includes its own IR pass-back sensor so adding more receivers does not require changing the original IR cable.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.