We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White COB LED strip on reel, 16.4 ft length, 2400 LEDs, 6000K daylight finish

BFKK

BFKK White COB LED Strip Light 16.4ft 2400 LEDs 6000K Dimmable RF Remote

SKU CH-8K49-JW41Y

A 16.4 ft COB strip with 2400 high-density LEDs delivers smooth 6000 K daylight at up to 4050 lumen, dimmable via an RF remote that works through walls up to 32 ft

  • 2400 high-density COB LEDs create a seamless linear glow with no dark spots
  • 4050 lumen output at 6000K daylight white delivers bright, efficient illumination for any room
  • CRI 90+ renders colours accurately for kitchens, bedrooms and workspaces
  • RF remote controls brightness through walls up to 32 feet away
  • Flexible, cuttable design with peel-and-stick backing enables quick custom installation

Bright 2400-LED strip for home and commercial use

This 16.4 ft COB LED strip contains 2400 high-density LEDs at 480 per metre, delivering up to 4050 lumens of 6000 K daylight white light with CRI 90+. The RF remote penetrates walls for control up to 32 ft away, and the strip runs on a 24 V UL-listed power supply. It suits kitchens, bedrooms, offices and retail displays needing smooth, uniform illumination.

Capacity and headroom for linear lighting

The high-density layout eliminates dark spots and glare while emitting very low heat, so the strip stays safe during extended runs. Dimming lets you match output to the task, from bright task lighting to subtle accent glow. The fixed 6000 K colour temperature means it cannot shift to warmer tones or coloured effects.

Practical limits of the RF-controlled system

Cut points let you shorten the strip to fit custom lengths, but each segment still needs the supplied 24 V driver and cannot be powered from a different voltage source. The RF remote range reaches 32 ft through walls, yet it cannot integrate with smart-home hubs or voice assistants. The adhesive backing requires a clean, dry surface and is not rated for permanent outdoor exposure.

Highlights

  • 2400 high-density COB LEDs create a seamless linear glow with no dark spots
  • 4050 lumen output at 6000K daylight white delivers bright, efficient illumination for any room
  • CRI 90+ renders colours accurately for kitchens, bedrooms and workspaces
  • RF remote controls brightness through walls up to 32 feet away
  • Flexible, cuttable design with peel-and-stick backing enables quick custom installation

Specifications

No published specifications for this item yet.

Questions about this item

How does the 24 V COB strip behave when installed alongside my existing 24 V lighting?

Both run on the same 24 V supply, so they share the same voltage level; the strip draws power independently through its own included power supply, keeping the circuits separate.

How can I verify the 6000 K output and CRI 90+ are working after setup?

The light should appear as a clean daylight white with no visible dark spots or colour shift along the 16.4 ft length, and colours in the room will look natural under the high-CRI output.

What comes in the box and what must I buy separately?

The kit includes the 16.4 ft COB strip with adhesive backing, a DC power supply, and an RF remote controller; no extra parts are required for basic plug-and-play operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.