We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
50 shielded Cat6 pass-through RJ45 connectors with gold contacts and strain relief boots in a storage jar

BFKK

BFKK Shielded Cat6 Pass Through RJ45 Connectors 50PCS with Strain Relief Boots

SKU CH-WVND-GKWKZ

Shielded Cat6 pass-through connectors with gold-plated 3-prong contacts and strain-relief boots for custom cables up to 1000 Mbps

  • Shielded metal enclosure eliminates cross-talk and EMI
  • Gold-plated 3-prong contacts deliver stable gigabit speeds up to 1000Mbps
  • Pass-through design simplifies termination for 24 to 26 AWG cables
  • 1mm hole diameter ensures precise wire fit during crimping
  • 50 connectors and 50 strain-relief boots in a portable storage jar

BFKK Shielded Cat6 Pass-Through Connectors

BFKK Shielded Cat6 pass-through RJ45 connectors come in a pack of 50 pieces with 50 strain relief boots. The gold-plated 8P8C 3-prong contacts support gigabit transmission up to 1000Mbps. A metal shielded enclosure eliminates cross-talk and electromagnetic interference. The connectors are stored in a convenient jar for protection and portability.

Installers Using 24 to 26 AWG Cable

These connectors suit installers terminating 24 to 26 AWG round or flat network cable with a 1.1mm hole diameter. They require a pass-through compatible crimp tool for proper termination. Builders needing connectors for thicker gauge cable or non-pass-through crimping should look at alternative connector types.

1.1mm Hole Diameter for 24-26 AWG

The single specification that decides fit is the 1.1mm hole diameter designed for 24 to 26 AWG conductors. Verify your cable conductor size matches this range before purchase. Using cable outside this specification will prevent proper contact seating and reliable gigabit performance.

Highlights

  • Shielded metal enclosure eliminates cross-talk and EMI
  • Gold-plated 3-prong contacts deliver stable gigabit speeds up to 1000Mbps
  • Pass-through design simplifies termination for 24 to 26 AWG cables
  • 1mm hole diameter ensures precise wire fit during crimping
  • 50 connectors and 50 strain-relief boots in a portable storage jar

Specifications

No published specifications for this item yet.

Questions about this item

What cable gauge and outer diameter do the 1.1 mm pass-through holes accept?

The connectors fit 24 to 26 AWG round or flat cable; each pass-through hole measures 1.1 mm in diameter.

Which crimp tool works with the pass-through design, and what mistake do installers make?

Use a pass-through RJ45 crimp tool; the common error is not pushing wires fully through the guide holes before crimping, leaving exposed conductors.

When should the gold-plated 3-prong contacts or strain-relief boots be replaced?

Replace a connector if the gold plating shows wear, a prong is bent, or the boot cracks — any of these can drop the link below 1000 Mbps.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Network Ethernet Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.