We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 7.2V 2000mAh Ni-MH battery pack with label showing Scanreco and Palfinger compatibility

BFKK

BFKK Replacement Battery for Scanreco/Palfinger RC-400 7.2V 2000mAh

SKU CH-ZCQZ-NP6N1

Replacement battery for Scanreco and Palfinger crane remote controls, 7.2V 2000mAh Ni-MH with built-in protection circuits

  • Battery TypeLithium
  • Direct replacement for Scanreco RC-400 and Palfinger crane remotes
  • 2 V 2000 mAh Ni-MH pack delivers 14.40 Wh runtime
  • Built-in protection guards against short circuit, over-current, over-charge, over-voltage and overheat
  • Compact 150.25 × 50.12 × 28.40 mm form factor fits original battery bay
  • Installation videos available online for quick, tool-free fitting

Replacement Battery for Scanreco

This 7.2V 2000mAh Ni-MH pack replaces the original battery in Scanreco RC-400, 592, 590, Maxi and Mini transmitters as well as Palfinger RC-400 crane remote controls. It is built for operators who need a direct drop-in power source for industrial radio remotes.

2000mAh capacity with 14.40Wh energy rating

The cell delivers 7.2 volts and 2000mAh, giving typical shift-length runtime for crane and equipment remotes. Runtime falls off when the transmitter draws continuous high current or operates in very cold conditions where Ni-MH chemistry loses capacity.

Built-in protection circuits for safe charging

Short-circuit, over-current, over-charge, over-voltage and overheat guards allow charging without external monitoring. The pack runs cool during normal remote-control use and produces no audible noise because it has no moving parts.

Highlights

  • Direct replacement for Scanreco RC-400 and Palfinger crane remotes
  • 2 V 2000 mAh Ni-MH pack delivers 14.40 Wh runtime
  • Built-in protection guards against short circuit, over-current, over-charge, over-voltage and overheat
  • Compact 150.25 × 50.12 × 28.40 mm form factor fits original battery bay
  • Installation videos available online for quick, tool-free fitting

Specifications

Battery TypeLithium

Questions about this item

Will this 7.2V 2000mAh pack fit the original Scanreco RC-400 slot without adapter cables?

It matches the RC-400 form factor at 150.25 x 50.12 x 28.40 mm and uses the same connector, so it slides straight into the existing battery compartment.

How can I confirm the battery is delivering the rated 14.40 Wh after installation?

Charge fully, then measure voltage under load; a healthy pack will hold near 7.2 V while powering the crane remote and show roughly 2000 mAh capacity on a cycle test.

Does the box include a charger or only the Ni-MH battery itself?

Only the replacement battery is supplied; a compatible 7.2 V Ni-MH charger must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.