We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal power strip with 16 wide-spaced outlets and 10 ft cord

BFKK

BFKK Metal Wall Mount Power Strip 16 Outlet 10 ft 14AWG 15A 125V 1875W Black

SKU CH-304M-4CFG7

A 16-outlet metal power strip with 1.69 in spacing for large plugs, 10 ft 14AWG cord, 15 A breaker, and ETL/UL/CSA safety certification

  • 16 widely spaced outlets fit bulky plugs
  • 10 ft 14AWG cord reaches distant work areas
  • 15 A circuit breaker guards against overloads
  • Aluminium alloy housing resists impact and corrosion
  • ETL listed to UL 1363 and CSA 22.2 No. 308

16-Outlet Metal Power Strip

This BFKK metal wall-mount power strip provides 16 widely spaced AC outlets with a centre-to-centre distance of 1.69 inches, making it suitable for bulky plugs. The unit is constructed from aluminium alloy and includes a 10 ft SJT 14AWG power cord rated for 15 A at 125 V. An integrated illuminated switch and 15 A circuit breaker offer protection against short circuits, over-current, over-temperature and over-voltage. It is ETL listed and conforms to UL 1363 and CSA C22.2 No. 308 standards.

Sustained Load Behaviour

The 14 AWG cord and 15 A breaker are rated for continuous operation up to 1875 W at 60 Hz. Under sustained loads the aluminium housing helps dissipate heat while the breaker will trip if the total draw exceeds 15 A, preventing overheating of the cord and outlets. The heavy-duty SJT jacket resists fire, impact and rust during prolonged use in workshops, garages or industrial settings.

Pre-Installation Checks

Verify that the mounting surface can accept the four included screws and that the 10 ft cord reaches your nearest grounded receptacle without strain. Ensure the combined wattage of connected equipment stays below 1875 W and that each plug fits the standard outlet spacing of 1.69 inches. Confirm the installation location is indoors and dry, as the strip is designed for indoor use only.

Highlights

  • 16 widely spaced outlets fit bulky plugs
  • 10 ft 14AWG cord reaches distant work areas
  • 15 A circuit breaker guards against overloads
  • Aluminium alloy housing resists impact and corrosion
  • ETL listed to UL 1363 and CSA 22.2 No. 308

Specifications

No published specifications for this item yet.

Questions about this item

Does the 15 A circuit breaker and indicator-light switch stay cool and quiet during continuous 1875 W loads?

The strip uses a 15 A breaker and indicator switch rated for 1875 W at 125 V, 60 Hz; the aluminium-alloy housing and 14 AWG SJT cord are designed to dissipate heat without fan noise.

What mounting hardware must I already have to install the 16-outlet strip on a wall or bench?

Four screws are included for mounting; you only need a screwdriver and a surface that accepts wood or metal screws.

Will the 1.69 in outlet spacing accept bulky transformer blocks alongside standard plugs on my existing bench gear?

Yes — the 4.3 cm centre-to-centre spacing fits large adapters side-by-side across all 16 outlets.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.