We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Hand-held tweezer meter with 1.14-inch colour OLED screen

BFKK

BFKK LCR ESR Meter Tweezers 10kHz OLED car electronics accessory

SKU CH-XBVK-R6CFG

Handheld LCR/ESR meter tweezers measure resistance, capacitance and inductance at three frequencies with a 1.14-inch OLED display

  • Multi-frequency testing at 100 Hz, 1 kHz and 10 kHz for accurate component analysis
  • Auto-identification shows L, C, R, D, Q and ESR simultaneously on 1.14-inch OLED
  • Tweezer probes handle 0402 and 0603 SMD parts with one hand
  • Replaceable tips extend service life on dense PCBs
  • Wide ranges: resistance 1 Ω to 10 MΩ, capacitance 1 nF to 1 mF, inductance 10 µH to 60 H

Handheld LCR/ESR tester for SMD work

This BFKK tweezer meter targets technicians and hobbyists who need to measure passive components directly on dense circuit boards. It combines capacitance, inductance and resistance ranges with an ESR function in a single clamp-style instrument. The 1.14 inch colour OLED shows primary and secondary parameters at once. No bench-top footprint is required.

Fits into a field kit alongside a multimeter

The clamp probes 0402 and 0603 packages one-handed, freeing the other hand for board manipulation or documentation. Replaceable tips extend service life when contacts wear. Three test frequencies at 100, 1k and 10k Hz plus two voltages at .3 and .6 Vrms cover a range of component types without extra fixtures. Auto-ranging removes manual range switching.

Sustained measurement stability

Auto-identification continuously updates L, C, R, D, Q and Rs readings while the tweezers remain clamped. The 10 Hz to 60 H inductance span and 1 nF to 1 mF capacitance span stay active during extended sessions. OLED contrast remains legible under workshop lighting without backlight bleed. Buyers needing logarithmic sweep or PC logging will not find those functions here.

Highlights

  • Multi-frequency testing at 100 Hz, 1 kHz and 10 kHz for accurate component analysis
  • Auto-identification shows L, C, R, D, Q and ESR simultaneously on 1.14-inch OLED
  • Tweezer probes handle 0402 and 0603 SMD parts with one hand
  • Replaceable tips extend service life on dense PCBs
  • Wide ranges: resistance 1 Ω to 10 MΩ, capacitance 1 nF to 1 mF, inductance 10 µH to 60 H

Specifications

No published specifications for this item yet.

Questions about this item

How does the 10 kHz test frequency affect ESR readings on electrolytic capacitors?

The meter measures ESR at 100 Hz, 1 kHz and 10 kHz, so you can compare the 10 kHz value with the lower frequencies to see frequency-dependent losses in electrolytic caps.

What heat or power impact should I expect when the tweezers run continuously on a bench all day?

The handheld unit draws only milliamps from its internal battery, so it stays cool and does not add noticeable heat to the work area during extended use.

Do I need a specific battery type installed before the tweezers will power on?

The tester ships with its own internal rechargeable cell and a USB charging cable, so no separate battery purchase is required to start measuring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.