BFKK
BFKK Hydraulic Crimping Tool Kit 8 US TON 12-2/0 AWG 9 Dies
Hydraulic crimping tool kit with nine hexagon dies for 12 to 2/0 AWG terminals and a cable cutter rated to 2/0 AWG
- Crimps 12 to 2/0 AWG terminals with 9 included hex dies
- Cuts copper and aluminium cables up to 2/0 AWG
- Rotates 180° for access in tight spaces
- One-hand operation thanks to innovative return spring
- Quenched plier head with guided dies resists breakage
Hydraulic Crimping Kit 8 US TON
This hydraulic crimping tool kit delivers 8 US tons of force for terminating copper and aluminum cables from 12 AWG to 2/0 AWG. It includes nine hexagon die pairs covering the full range and a cable cutter rated to 2/0 AWG. The tool suits automotive, marine and industrial electrical work where reliable lug connections are required.
Installing dies and operating single-handed
The innovative collet structure adds a die guide that prevents lateral shake during crimping, while the overall quenching treatment keeps the jaws from breaking. A built-in handle return spring lets one hand operate both handles so a single person can complete the crimp without assistance. The head rotates 180 degrees for access in confined areas. Note that the supplied cutter cannot cut wire rope or stainless steel cable.
Check cable type and crimp range before ordering
Verify that your conductors fall within the 12 AWG to 2/0 AWG crimping window and that you only need to cut copper or aluminum cable. The kit does not cut wire rope, so stainless steel or armoured cables require a separate cutter. Ensure you have the correct die size for each terminal before starting the job.
Highlights
- Crimps 12 to 2/0 AWG terminals with 9 included hex dies
- Cuts copper and aluminium cables up to 2/0 AWG
- Rotates 180° for access in tight spaces
- One-hand operation thanks to innovative return spring
- Quenched plier head with guided dies resists breakage
Specifications
No published specifications for this item yet.
Questions about this item
How can I verify the crimping tool is working correctly after setup?
Check that the 9 included hexagon dies from 12 AWG to 2/0 AWG seat firmly without side play, that the head rotates 180° freely, and that the return spring lets you operate both handles with one hand for a complete crimp cycle.
What comes in the kit and what must I buy separately?
The kit supplies the hydraulic crimper head, 9 die pairs covering 12, 10, 8, 6, 4, 2, 1/0 and 2/0 AWG, plus cable scissors for copper or aluminium cable; no separate dies or hydraulic fluid are required.
Which die size should I select for a 1/0 AWG welding cable?
Use the 1/0 AWG die pair that is already included in the 9-die set; it matches the crimping range printed on the tool for that wire size.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
