BFKK
BFKK Foldable Tablet Wall Mount 360° Rotation 2-Stage Arm 4.7-12.9 Inch accessory
Foldable wall mount holds 4.7 to 12.9 inch tablets with a 360° rotatable, two-stage alloy arm extending 10 to 43 cm
- Foldable arms retract to 10 cm for compact storage
- Extends to 43 cm giving flexible viewing distance
- 360° rotation lets you set any viewing angle
- Clamp adjusts from 5.3 to 11.81 inches fitting 4.7–12.9 inch tablets
- Four-hole metal base provides secure wall mounting
BFKK Foldable Tablet Wall Mount 360° Rotation
The BFKK foldable tablet wall mount fits devices from 4.7 to 12.9 inches. It suits kitchens, bathrooms, offices or gyms where a secure, hands-free viewing angle is needed. The aluminium alloy construction and four-hole metal base keep the tablet firmly anchored. Expandable clamps adjust from 5.3 to 11.81 inches wide for a tight grip.
2-Stage Arm Extends 10 cm to 43 cm
The two-stage arm folds down to 10 cm and extends to 43 cm, letting you position the screen close to the wall or further out. A 360° rotatable joint allows any viewing angle without moving the base. The shorter folded length reduces leverage on the mount, helping stability under sustained use. Alloy arms resist flex better than single-piece designs.
Four-Hole Drill Base With Included Screws
Installation uses the supplied screws and a four-hole metal base drilled into the wall. The clamp opens wide enough for most tablets but may not suit devices thicker than the maximum jaw width. Over-tightening the clamp screws can mark softer tablet edges. Ensure the wall material can hold the anchors before drilling.
Highlights
- Foldable arms retract to 10 cm for compact storage
- Extends to 43 cm giving flexible viewing distance
- 360° rotation lets you set any viewing angle
- Clamp adjusts from 5.3 to 11.81 inches fitting 4.7–12.9 inch tablets
- Four-hole metal base provides secure wall mounting
Specifications
No published specifications for this item yet.
Questions about this item
Does the arm generate any noise or heat when the tablet is held in place all day?
The mount has no moving parts, fans or electronics, so it produces no noise and no heat during continuous use.
What tools or surfaces must I already have to install this wall mount?
You need a wall or cabinet that can accept the four-hole metal base and the supplied screws, plus a drill and suitable drill bit for the mounting surface.
Will the clamp still grip an older 9.7-inch iPad that has a thick protective case?
The bracket expands from 5.3 to 11.81 inches, so it accommodates the 9.7-inch width, but the case must not push the total width beyond 11.81 inches for a secure fit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



