BFKK
BFKK Dual Band WiFi Antenna 2.4/5.8 GHz 3dBi RP-SMA Male 2-Pack
Dual-band 2.4 and 5.8 GHz omni-directional antennas with 3 dBi gain and RP-SMA male connectors, supplied as a two-pack for routers, adapters and cameras
- Dual-band coverage across 2.4 and 5.8 GHz ranges
- 3 dBi gain strengthens signal for routers and adapters
- Omni-directional pattern sends signal evenly in all directions
- RP-SMA male connector fits common networking and camera gear
- Two antennas included for MIMO or spare replacement
Dual-band RP-SMA antenna pair
This pack contains two omni-directional antennas covering the 2.4 GHz and 5.8 GHz bands with 3 dBi gain each. They connect via RP-SMA male plugs, which have a centre hole rather than a pin. The antennas are designed as direct replacements for routers, USB adapters, PCIe cards and a wide range of 5.8 GHz video gear such as FPV monitors and backup cameras.
Screw-on installation with connector check
Each antenna screws onto a female RP-SMA jack by hand; no tools are required. The most common issue is mistaking RP-SMA for standard SMA — the male RP-SMA plug has no centre pin, so it will not mate with a standard SMA jack. Verify the jack on your device before fitting to avoid a loose or non-functional connection.
Suits dual-band routers and 5.8 GHz video links
Buyers upgrading router antennas or extending range on compatible USB and PCIe wireless cards will find these a direct fit. They also serve FPV drone controllers, wireless AV extenders and security cameras that use 5.8 GHz RP-SMA ports. Users needing higher gain for long-range point-to-point links or antennas with a different connector type such as N-type or MHF should look at other options.
Highlights
- Dual-band coverage across 2.4 and 5.8 GHz ranges
- 3 dBi gain strengthens signal for routers and adapters
- Omni-directional pattern sends signal evenly in all directions
- RP-SMA male connector fits common networking and camera gear
- Two antennas included for MIMO or spare replacement
Specifications
No published specifications for this item yet.
Questions about this item
How can I confirm the antenna is operating on both the 2.4 GHz and 5.8 GHz bands after installation?
Check your router or adapter status page to verify active connections on both the 2400-2485 MHz and 5150-5850 MHz frequency ranges, and observe improved signal stability on connected devices.
What comes in the package and what extra items might I need to buy?
The box contains two RP-SMA male antennas; you only need to purchase additional units if your device has more than two antenna ports or if you require spare replacements.
Which version should I choose for a device with an RP-SMA female port needing 3 dBi gain?
This single 3 dBi dual-band model with RP-SMA male connectors is the correct choice; no other gain or connector variants are offered in this listing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



