We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BFKK

BFKK CPE200 5.8G 900Mbps 12dBi 24V PoE IP65 2-Pack

SKU CH-WP0E-GM1E8

Outdoor wireless bridge pair delivers 900 Mbps at 5.8 GHz over 2-3 km with 12 dBi antennas, 24 V PoE and IP65 protection

  • 8 GHz band reduces interference
  • 12 dBi antenna enables 2–3 km links
  • 900 Mbps maximum bridge throughput
  • IP65 rating protects against dust and water
  • 24 V PoE simplifies outdoor installation

Outdoor wireless bridge pair

The BFKK CPE200 kit contains two 5.8 GHz wireless access points built for point-to-point or point-to-multipoint links. Each unit integrates a 12 dBi directional antenna and is rated IP65 for dust and water resistance. The set targets installers who need a cable-free connection between separate buildings or remote sites.

Sustained-link behaviour

The radios use 11ac technology on the 5.8 GHz band to reduce adjacent-channel interference compared with 2.4 GHz alternatives. Maximum throughput between the pair is stated as 900 Mbps, with a usable range up to 2-3 km under clear line of sight. Automatic power and channel adjustment helps maintain stability over long periods.

Installation notes

LED indicators show master or slave role, device address and received signal strength to simplify alignment. A one-key bridge function completes the basic configuration without a detailed setup routine. The units are powered by 24 V passive PoE, so a compatible injector or switch port is required; no other mounting hardware is mentioned.

Highlights

  • 8 GHz band reduces interference
  • 12 dBi antenna enables 2–3 km links
  • 900 Mbps maximum bridge throughput
  • IP65 rating protects against dust and water
  • 24 V PoE simplifies outdoor installation

Specifications

No published specifications for this item yet.

Questions about this item

How much heat or noise does the CPE200 produce when running continuously outdoors?

The unit has no fan and uses passive cooling, so it runs silently; power draw is 24 V via PoE.

What must I already own to power and mount the two CPE200 units?

You need a 24 V PoE injector or switch for each unit and a pole or wall bracket for outdoor mounting.

Will the 5.8 GHz CPE200 interfere with my older 2.4 GHz Wi-Fi gear?

Operating on 5.8 GHz avoids the 2.4 GHz band, so it coexists without cross-interference.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.