We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two white outdoor wireless CPE units with integrated antennas

BFKK

BFKK CPE-452 5.8G 14dBi 300Mbps 2-Pack access point

SKU CH-51CR-M5XER

Outdoor 5.8 GHz wireless bridge pair with 14 dBi antennas delivering 300 Mbps point-to-point or point-to-multipoint links using simple dial pairing and 24 V PoE on dual 100 Mbps ports

  • Point-to-point and point-to-multipoint links without GUI configuration
  • 14 dBi high-gain antenna delivers up to 300 Mbps throughput
  • 8 GHz band for long-range outdoor coverage
  • Dual 100 Mbps RJ45 ports with 24 V PoE on both
  • Digital-tube channel display and A/B master-slave switch

Outdoor 5.8 GHz Wireless Bridge Pair

The BFKK CPE-452 is a two-pack of outdoor wireless access points built for point-to-point or point-to-multipoint links. Each unit integrates a 14 dBi high-gain antenna to deliver up to 300 Mbps throughput between paired bridges. The system targets installers who need to extend network or camera feeds across a property without trenching cable.

PoE-Powered Dual-Port Mounting

Every bridge carries two 100 Mbps RJ45 ports, both accepting 24 V passive PoE so a single Cat5e cable handles data and power. The included PoE adapters supply voltage only through their dedicated PoE ports, leaving the LAN ports free for downstream devices. No separate DC supply is required, simplifying pole or wall mounting where mains power is absent.

Dial-Based Pairing Without GUI

Channel pairing is set by changing the digital-tube characters on the unit itself; a steady LED confirms link-up while blinking shows configuration mode. An A-B button assigns master or slave roles instantly, allowing one master to serve multiple slaves on the same channel. This hardware-only setup removes the need for web-interface configuration during deployment.

Highlights

  • Point-to-point and point-to-multipoint links without GUI configuration
  • 14 dBi high-gain antenna delivers up to 300 Mbps throughput
  • 8 GHz band for long-range outdoor coverage
  • Dual 100 Mbps RJ45 ports with 24 V PoE on both
  • Digital-tube channel display and A/B master-slave switch

Specifications

No published specifications for this item yet.

Questions about this item

What is the maximum throughput the 5.8 GHz link can sustain between the two CPE-452 units?

The built-in 14 dBi antenna lets the paired bridges reach a 300 Mbps transmission rate under optimal alignment and clear line of sight.

How much heat or noise should I expect when the bridge runs continuously outdoors?

The unit is passively cooled with no fan, so it generates no audible noise; heat is dissipated through the metal enclosure during 24/7 operation.

Which cables and power gear must I already have to install the 2-pack?

You need two Cat 5e (or better) Ethernet cables for the 100 Mbps RJ45 ports; the included 24 V PoE adapters inject power over those same cables.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.