BFKK
BFKK CESS-238 Right Angle 6.35mm Male to 3.5mm Female Audio Adapter, 2 Pack
Two right-angle adapters convert 6.35 mm male plugs to 3.5 mm female sockets for instruments and audio gear
- Right-angle 6.35 mm plug fits tight equipment spaces
- 5 mm stereo socket connects standard headphones to pro gear
- Low-noise, waterproof build withstands stage and studio use
- 4-inch cable length keeps setup tidy without excess slack
- Pack of two adapters covers spare or dual-device needs
Right-angle 6.35 mm to 3.5 mm stereo adapter
This two-pack converts a 6.35 mm TRS jack to a 3.5 mm socket using a 90 degree right-angle profile. It is built for musicians, engineers and home-audio users who need a compact, low-noise connection between instruments, mixers, amplifiers or portable players. The heavy-duty, waterproof housing is rated for long-term use.
Check your source jack and plug orientation
Verify that the equipment you are connecting presents a 6.35 mm three-pole TRS output, not a TS or balanced XLR socket. Ensure the 3.5 mm plug on your headphones or cable is also a stereo TRS type. The right-angle shape needs a few millimetres of side clearance, so confirm the jack recess on your device can accept the 90 degree bend without fouling adjacent controls.
Fits tight panels and frees straight-cable strain
The 90 degree bend lets the adapter sit flush against mixers, audio interfaces or instrument panels where a straight barrel would protrude. A four-inch tail gives enough reach to route the cable neatly without pulling on the jack. Two adapters in the pack allow a permanent studio install and a spare for gig bags or home-theatre racks.
Highlights
- Right-angle 6.35 mm plug fits tight equipment spaces
- 5 mm stereo socket connects standard headphones to pro gear
- Low-noise, waterproof build withstands stage and studio use
- 4-inch cable length keeps setup tidy without excess slack
- Pack of two adapters covers spare or dual-device needs
Specifications
No published specifications for this item yet.
Questions about this item
Does the pack contain both adapters or do I need to order a second one separately?
The pack includes two right-angle adapters so nothing extra is required.
Why choose the right-angle version instead of a straight connector?
The 90-degree design keeps the cable close to the device and reduces strain on the 6.35 mm jack.
Will the 4-inch cable reach from my mixer to my headphones without tension?
The short 4-inch lead is meant for close-range connections such as instrument-to-amp or headphone-to-mixer setups.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



