We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White Cat 6 outdoor Ethernet cable 50 ft with double jacket and 25 cable ties

BFKK

BFKK Cat 6 Outdoor Ethernet Cable 50 Ft White 24 AWG CCA UV LLDPE Direct Burial 25 Ties

SKU CH-7BP6-FSFM7

50 ft Cat 6 outdoor cable with double UV-resistant LLDPE jacket for direct burial, solid 24 AWG CCA conductors, gold-plated RJ45 connectors and 25 ties included

Size 50 ft

  • Double UV-resistant LLDPE jacket protects against sun, moisture and direct burial
  • 24 AWG solid CCA conductors with gold-plated RJ45 deliver 10 Gbps up to 180 ft
  • Cross separator reduces crosstalk for clean 550 MHz signal
  • Includes 25 ties for secure outdoor routing
  • Universal RJ45 compatibility supports PoE cameras, routers and NAS devices

Outdoor Cat 6 cable for long runs

This 50 foot Cat 6 Ethernet cable uses solid copper-clad aluminium conductors and a double-jacket design. The inner PVC layer and outer UV-resistant LLDPE jacket protect the four twisted pairs during direct burial or conduit installation. Gold-plated RJ45 connectors include strain-relief boots to reduce breakage at the plug. Twenty-five cable ties are included for securing the run.

Suits buried or outdoor POE camera links

Installers who need a single 50 foot outdoor run for POE cameras, access points or building-to-building links will find the double jacket and solid conductors appropriate. Buyers who require pure copper conductors, shielded FTP or SFTP construction, or Cat 6A and Cat 7 performance specifications should look elsewhere. The cable is relatively stiff and barely bends to a 90 degree angle, so tight indoor patching is not its strength.

Handles 1 Gbps at full length

At the supplied 50 foot length the cable supports 10 Gbps at 550 MHz, well above the 180 foot threshold where the rating drops to 1 Gbps at 250 MHz. The 24 AWG solid CCA conductors and cross separator keep crosstalk low across the full run. For runs exceeding 180 feet the bandwidth halves, so very long direct-burial links should be planned at gigabit speeds.

Highlights

  • Double UV-resistant LLDPE jacket protects against sun, moisture and direct burial
  • 24 AWG solid CCA conductors with gold-plated RJ45 deliver 10 Gbps up to 180 ft
  • Cross separator reduces crosstalk for clean 550 MHz signal
  • Includes 25 ties for secure outdoor routing
  • Universal RJ45 compatibility supports PoE cameras, routers and NAS devices

Specifications

No published specifications for this item yet.

Other versions of this model

3 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What RJ45 devices do I need at each end of this 50 ft cable?

Connectors are RJ45 male on both ends, so you need RJ45 female ports on a router, switch, PoE camera, NVR, PC, printer, server, NAS, VoIP phone or any other standard network device.

Will this 24 AWG CCA cable run at 1 Gbps on my older Cat 5e switch ports?

Yes, the cable is backward compatible with Cat 5 and Cat 5e equipment and will negotiate 1 Gbps at 250 MHz on legacy switch ports.

How can I verify the link is operating at 10 Gbps after I bury the 50 ft run?

Check the link speed on the connected switch or router; a 50 ft length is well under the 180 ft limit, so the interface should report 10 Gbps at 550 MHz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Network Ethernet Cables

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.