We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of clear curved monitor lenses with black ABS clamps, 730 mm long

BFKK

BFKK Bezel Free Kit Longer Version 35-55" Curved Monitors

SKU CH-JFC8-9H9RY

A bezel-free kit that joins two curved monitors from 35 to 55 inches with a 95-per-cent-transmission PMMA lens and adjustable ABS clamps for angles between 90 and 170 degrees

Size 730mm

  • Wider curved displays supported up to 55 inches
  • Optical lens delivers 95 percent light transmittance
  • Enlarged clamps allow 90 to 170 degree monitor angles
  • Industrial ABS moulding gives high strength without cracking
  • Third generation kit designed for gaming setups

Bezel-Free Kit for 35-55" Curved Monitors

This longer-version kit joins two curved monitors or TVs into a single continuous view. Third-generation optical lenses remove the centre gap and deliver 95 % light transmittance. Industrial ABS clamps adjust the angle between 90 and 170 degrees. The unit measures 730 mm by 100 mm by 83 mm. Monitors are not included.

Gaming setups wanting gap-free immersion.

The kit is designed for games and the maker advises against office or work use. Buyers who need colour-critical accuracy for professional tasks should look elsewhere. Two-person installation is recommended to align the lenses without gaps. Bezel thickness and width must not exceed 2.5 cm.

Fits 35-55" screens with bezels up to 2.5 cm

This single specification decides compatibility: the longer version supports displays from 35 to 55 inches provided each bezel is no thicker or wider than 2.5 cm. If your monitors fall outside that range the kit will not mount correctly.

Highlights

  • Wider curved displays supported up to 55 inches
  • Optical lens delivers 95 percent light transmittance
  • Enlarged clamps allow 90 to 170 degree monitor angles
  • Industrial ABS moulding gives high strength without cracking
  • Third generation kit designed for gaming setups

Specifications

No published specifications for this item yet.

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the bezel-free kit on two curved monitors, and what step do people often get wrong?

Mount the enlarged ABS clamps on each monitor bezel — thickness and width must not exceed 2.5 cm — then insert the 730 mm PMMA lens between them at an angle between 90° and 170°. The step most people miss is having a second person fine-tune the monitor positions until no visible gap remains.

What maintenance or replacement will the kit need later?

The PMMA lens maintains 95 % light transmittance; clean it only with a soft microfibre cloth and non-abrasive cleaner to avoid scratches. The ABS clamps and lens are solid pieces with no moving parts, so no scheduled replacement is required unless physical damage occurs.

What limit appears first during extended gaming sessions?

The kit is rated for monitor bezels up to 2.5 cm thick and angles up to 170°; exceeding either limit causes misalignment or gaps before any optical degradation occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.