We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular beige industrial I/O module with terminal blocks and Allen-Bradley branding

BFKK

BFKK Allen Bradley 1762-IF2OF2 MicroLogix 1200 I/O Module

SKU CH-X071-583J2

An analog I/O expansion module for MicroLogix 1200 controllers with two differential inputs and industrial-grade accuracy

  • Analog I/O expansion for MicroLogix 1200 controllers
  • Two differential unipolar inputs with 2.5-millisecond update time
  • Common-mode rejection of 55 dB at 50-60 hertz
  • Overall accuracy ±0.55 percent full scale from -20 to 65 degrees Celsius
  • Input impedance 250 Ohms current and 200 kilo-Ohms voltage

Allen Bradley 1762-IF2OF2 MicroLogix 1200 I/O Module

The 1762-IF2OF2 is an analog I/O expansion module manufactured by Allen-Bradley for the MicroLogix 1200 programmable controller series. It is built for industrial environments and connects directly to the controller to add local analog signal handling.

Two differential unipolar inputs

The module provides two differential unipolar inputs with a 2.5-millisecond update time using a successive approximation converter. It accepts a common-mode voltage range of ±27 volts and delivers 55 dB common-mode rejection at 50 to 60 hertz. Non-linearity is ±0.12 percent while overall accuracy is ±0.55 percent full scale from -20 to 65 degrees Celsius and ±0.3 percent at 25 degrees Celsius. Input impedance is 250 Ohms for current terminals and 200 kilo-Ohms for voltage terminals.

New sealed condition ready for installation

The unit ships new and sealed, eliminating the need for recalibration or handling of previously installed hardware. This allows immediate integration into a MicroLogix 1200 system without additional preparation steps.

Highlights

  • Analog I/O expansion for MicroLogix 1200 controllers
  • Two differential unipolar inputs with 2.5-millisecond update time
  • Common-mode rejection of 55 dB at 50-60 hertz
  • Overall accuracy ±0.55 percent full scale from -20 to 65 degrees Celsius
  • Input impedance 250 Ohms current and 200 kilo-Ohms voltage

Specifications

No published specifications for this item yet.

Questions about this item

Will the 1762-IF2OF2 share the MicroLogix 1200 backplane power without an extra supply?

The module draws its power through the MicroLogix 1200 expansion bus, so no separate power adapter is required when it is connected to a compatible controller.

Which LED pattern confirms the 1762-IF2OF2 is communicating with the processor?

The module status LED shows solid green when the 1762-IF2OF2 is powered and actively exchanging data with the MicroLogix 1200 processor.

Does the sealed box include the terminal block for wiring the two inputs and two outputs?

The 1762-IF2OF2 ships with a removable terminal block installed, so field wiring can begin immediately without ordering a separate connector.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.