We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
BFKK AI-9 fusion splicer kit with 5 inch screen and cleaver tools

BFKK

BFKK AI-9 Fusion Splicer Kit 7800mAh 5s Splice 15s Heat

SKU CH-3XSS-9CCBS

A fusion splicer kit that splices in 5 seconds and heats in 15 seconds with a 7800 mAh battery good for about 200 cycles

  • Splices in 5 seconds for rapid project completion
  • Heats in 15 seconds to minimise downtime
  • 7800 mAh battery delivers about 200 splice-and-heat cycles per charge
  • 3-in-1 holder accepts SM, MM, bare, pigtail, rubber-insulated and multi-fibre cables
  • Built-in power meter and VFL measure loss, verify continuity and assess link quality

BFKK AI-9 Fusion Splicer Kit

The BFKK AI-9 is a core-alignment fusion splicer kit designed for fiber optic cable projects. It integrates a cleaver, power meter, and visual fault locator into a single portable unit. The device uses six-motor alignment technology to achieve low-loss splices for single-mode and multimode fibers. It is built for technicians working in field installation and maintenance environments.

Suited for field technicians and project engineers

This kit suits professionals who need rapid splicing cycles and integrated testing tools for FTTH, security, and infrastructure networks. The 7800mAh battery supports approximately 200 splice-and-heat cycles per charge. Buyers who require ribbon-fiber splicing or specialized connector termination should evaluate alternative equipment. The unit focuses on single-fiber core alignment applications.

5-second splice and 15-second heat cycle

The splicer completes an automatic fusion splice in 5 seconds and finishes the protective sleeve heating in 15 seconds. Typical splice loss measures 0.025dB for SM (G.652/G.657), 0.01dB for MM (G.651), and 0.04dB for DS/NZDS (G.655/G.657). The 3-in-1 holder accepts coating diameters from 100 to 1000µm and cladding diameters from 80 to 150µm.

Highlights

  • Splices in 5 seconds for rapid project completion
  • Heats in 15 seconds to minimise downtime
  • 7800 mAh battery delivers about 200 splice-and-heat cycles per charge
  • 3-in-1 holder accepts SM, MM, bare, pigtail, rubber-insulated and multi-fibre cables
  • Built-in power meter and VFL measure loss, verify continuity and assess link quality

Specifications

No published specifications for this item yet.

Questions about this item

How often will the 5-inch 800X480 screen need replacement?

The display is rated for 48000 to 60000 splicing cycles before a new unit is recommended.

What limits continuous operation first during a long day of splicing?

The 7800mAh lithium battery supports about 200 splice-and-heat cycles per charge and recharges in 3.5 hours.

How much heat and noise does the splicer produce when running all day?

Each heating cycle finishes in 15 seconds; the kit runs on a 7800mAh battery with no active cooling fan mentioned.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.