We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square 60mm axial cooling fan, black frame, seven blades, wire leads

BFKK

BFKK 614NHHR 24V 125mA 3W 60mm Axial Fan

SKU CH-TR7P-58PFJ

A 60 mm DC axial fan delivering 54.0 m³/h airflow at 6850 min⁻¹ from a 24 V, 0.125 A, 3 W supply, rated for –20 °C to 70 °C operation

  • Efficient 24 VDC cooling for compact spaces
  • High 6850 RPM airflow moves 54.0 m³/h
  • Low 0.125 A draw keeps power at 3 W
  • Operates reliably from -20 °C to 70 °C
  • 60×60×25 mm frame fits standard inverter mounts

Compact 24 V axial fan

The BFKK 614NHHR is a 60 mm square DC axial fan rated for 24 V operation at 0.125 A and 3 W. It targets engineers and technicians who need a small, direct-current blower for inverter cooling or similar electronics enclosures.

Steady-state airflow and temperature range

At its nominal speed of 6850 min-1 the fan delivers a maximum free-air flow of 54.0 m3/h. The unit is specified for continuous operation from -20 °C up to 70 °C, so thermal performance remains consistent across the full industrial range.

Straightforward panel mounting

The 60*60*25 mm frame fits standard cut-outs and the two-wire DC connection requires only correct polarity. Installers must verify that the 24 V supply can provide 125 mA continuously; reversed voltage or undersized wiring are the typical causes of start-up failure.

Highlights

  • Efficient 24 VDC cooling for compact spaces
  • High 6850 RPM airflow moves 54.0 m³/h
  • Low 0.125 A draw keeps power at 3 W
  • Operates reliably from -20 °C to 70 °C
  • 60×60×25 mm frame fits standard inverter mounts

Specifications

No published specifications for this item yet.

Questions about this item

How loud is the 6850 min-1 Ebmpapst 614NHHR fan when it runs continuously?

The fan spins at 6850 min-1 and draws 0.125 A at 24 VDC; no published sound-pressure figure is available.

What power source must I already have to run this 24 VDC 3 W axial fan?

A 24 VDC supply capable of at least 0.125 A is required to operate the fan.

Will this 60 mm square, 25 mm thick fan fit the screw pattern on my older 60 mm chassis?

The frame measures 60 mm by 60 mm by 25 mm, matching the common 60 mm mounting footprint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.