BFKK
BFKK 600LBs/280KG Electromagnetic Lock OutSwinging Door 12V with Z and L Bracket
Holds out-swinging doors with 600 lbs force on 12 V DC power, includes Z and L brackets for wood, metal, glass or fire-rated doors
- 600 lbs holding force keeps doors securely locked
- 12 V DC operation draws only 0.11–0.15 A
- Hard-anodised aluminium resists corrosion and water ingress
- Built-in reverse-current protection prevents coil damage
- Z and L brackets included for out-swinging door mounting
Outward-Opening Door Lock
The BFKK electromagnetic lock is designed for out-swinging doors and operates on a 12 V DC supply. It delivers a holding force of 280 kg or 600 lbs to secure the entry point. The body uses high-strength aluminium with a hard anodized finish for corrosion and water resistance. A built-in reverse current protection device guards the circuit during operation.
Wood Metal Glass Fire Doors
This unit suits wooden, metal, glass and fireproof doors where a fail-secure magnetic hold is required. The package includes both Z and L brackets to simplify mounting on the door frame. Buyers who need a fail-safe lock that releases when power is cut should look at a different locking principle. Installations that demand a voltage other than 12 V DC cannot use this model.
NC Mode Powered Lock
The lock stays locked only while 12 V DC power is supplied, drawing between 0.11 A and 0.15 A in normal operation. Removing power releases the door immediately, which defines the access-control behaviour. This single operating mode determines whether the unit matches the safety plan for the opening. No other voltage or mode is supported by this device.
Highlights
- 600 lbs holding force keeps doors securely locked
- 12 V DC operation draws only 0.11–0.15 A
- Hard-anodised aluminium resists corrosion and water ingress
- Built-in reverse-current protection prevents coil damage
- Z and L brackets included for out-swinging door mounting
Specifications
No published specifications for this item yet.
Questions about this item
What power supply do I need to run the 12 V electromagnetic lock?
A DC 12 V supply capable of delivering 0.11 A to 0.15 A is required; the lock draws that current continuously while powered.
Can the Z and L brackets supplied with the lock be used on my existing aluminium door frame?
Yes, the included Z and L brackets are designed for wooden, metal, glass or fire-rated doors, so an aluminium frame is compatible.
How can I confirm the lock is holding with its rated 280 kg force after installation?
With power applied the lock enters NC mode and stays magnetically sealed; attempt to pull the door open — it should resist up to the rated holding force.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
