BFKK
BFKK 600lbs/280kg Electromagnetic Door Lock 12V OutSwinging Door Access Control System
Holds doors with 600lbs force, runs on 12V at .11–.15A, and fits wood, metal, glass or fireproof doors
- Strong 600 lbs holding force secures doors reliably
- 12 V DC operation with low 0.11–0.15 A draw
- Hard-anodised aluminium resists corrosion and water ingress
- Built-in reverse-current protection safeguards the circuit
- Fits wooden, metal, glass and fire-rated doors
Out-swinging door access control
The BFKK 600lbs electromagnetic lock provides 280kg holding force for single out-swinging doors. It operates on 12V DC at 0.11A to 0.15A current draw. The unit uses a normally closed mode so the door stays locked while power is supplied. High-strength aluminum with hard anodizing resists corrosion and water ingress.
Compatibility and power check
Verify the door frame can accommodate an out-swinging bracket and that a 12V DC supply delivering at least 0.15A is available. Confirm the door material is wood, metal, glass or fire-rated to match the stated applications. Ensure wiring can reach the lock location without exceeding voltage drop limits.
Replaces basic latch hardware
This lock upgrades a standard mechanical latch to powered access control for offices, shops or secure rooms. The jump is worth it when you need remote release, audit trails or integration with keypads and intercoms. It is not suited for buyers who need battery operation or inward-swinging door mounting.
Highlights
- Strong 600 lbs holding force secures doors reliably
- 12 V DC operation with low 0.11–0.15 A draw
- Hard-anodised aluminium resists corrosion and water ingress
- Built-in reverse-current protection safeguards the circuit
- Fits wooden, metal, glass and fire-rated doors
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the box with the BFKK electromagnetic lock, and do I need to buy a power supply or mounting brackets separately?
The lock body is supplied; a 12 V DC power source and any mounting brackets for your door type must be sourced separately.
Which holding-force version should I choose for a standard outward-swinging door?
This single-door model provides 280 kg / 600 lbs holding force at 12 V, matching the specification shown.
What does the 280 kg holding force mean when the lock is powered on my door?
When energised at 12 V the lock draws 0.11–0.15 A and resists up to 280 kg of pull force in NC mode.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
