We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ten red oval LED trailer tail lights with black rubber grommets and three-prong wire pigtails

BFKK

BFKK 6 Inch Oval LED Trailer Tail Lights 10 LED 10Pcs Red

SKU CH-YMJQ-RHFPJ

Ten-piece set of 6-inch oval LED trailer tail lights with red lenses, each containing ten LEDs and functioning as stop, turn and tail lights.

  • Multi-function stop, turn and tail light in one unit
  • Ten LED chips per lamp draw less current than incandescent bulbs
  • IP65 waterproof rating protects against dust and water jets
  • Flush-mount design with rubber grommets and standard three-prong plug
  • Operates on 12 V DC across 8–16 V vehicle systems

Ten-piece kit for 12 V trailers

This set contains ten 6-inch oval LED tail lights with red lenses, each fitted with ten LED chips. They operate on 12 V DC and accept an 8–16 V range, making them suitable for semi-truck trailers, service trucks, buses, vans, utility trailers, boat trailers, horse trailers, pick-ups, UTVs and lorries. The sealed, flush-mount design is rated IP65 for water resistance but must not be submerged.

Rubber grommets and three-prong pigtails included

Every light ships with a black rubber grommet and a standard three-prong wire plug pigtail, so no separate hardware is required. The grommet ring measures approximately 7.5 inch outer diameter with a 6.3 inch inner diameter and 1.75 inch thickness. Wiring is colour-coded: white for ground, red for high brightness (stop/turn) and black for low brightness (tail).

Drill a 6.6 inch hole for flush mounting

Installation requires drilling a hole of about 6.6 inch to seat the grommet and light assembly. The three-prong plug connects directly to existing trailer harnesses that use the same pin layout. A common issue is reversing the red and black leads, which swaps brake and tail intensities; verifying the colour code before final tightening avoids rework.

Highlights

  • Multi-function stop, turn and tail light in one unit
  • Ten LED chips per lamp draw less current than incandescent bulbs
  • IP65 waterproof rating protects against dust and water jets
  • Flush-mount design with rubber grommets and standard three-prong plug
  • Operates on 12 V DC across 8–16 V vehicle systems

Specifications

No published specifications for this item yet.

Questions about this item

Will the rubber grommets or 3-prong pigtails need replacing after a season of road use?

The kit includes ten rubber grommets and ten 3-prong wire plugs, so each light has its own fresh seal and connector for the initial fit.

At 12 V DC, how much current do the ten LEDs per light draw before the circuit becomes the limiting factor?

Each 6-inch oval light uses ten LED chips and is rated for 8–16 V DC operation; the supplier notes they draw less current than incandescent bulbs but does not publish an amp figure.

Do the sealed IP65 housings stay cool enough when the brake and turn functions run all day?

The lights are IP65 rated and designed for 12 V DC systems; LED chips run cooler than incandescent equivalents, so heat build-up during continuous use is minimal.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.