We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Fifty-foot orange welder extension cord with black NEMA 6-50 plugs, coiled on floor

BFKK

BFKK 50 ft 250 V 40 A 8/3 Welder Extension Cord

SKU CH-5AYC-SC5DT

A 50 ft heavy-duty 8 AWG extension cord rated 40 A at 250 V with NEMA 6-50 plugs and an STW jacket for -40 °F to 140 °F operation

  • 50 ft reach extends power to distant outlets
  • 40 A pure-copper conductors handle heavy welder loads
  • STW jacket rated from -40 °F to 140 °F resists weather and heat
  • NEMA 6-50P male and 6-50R female fit most welders
  • ETL approved for verified safety compliance

50 ft 40 A Welder Extension Cord

This 50 ft heavy-duty extension cord is rated for 40 A at 250 V, making it suitable for MIG, TIG and plasma cutting equipment. It uses 8 AWG all-copper conductors inside an STW jacket that remains flexible from -40 °F to 140 °F. The cord carries ETL approval for safety compliance.

NEMA 6-50 Plug Compatibility

Installation is straightforward: the cord terminates in a NEMA 6-50P male plug and a NEMA 6-50R female receptacle, matching the most common industrial welder outlets. No tools or wiring are required; simply connect between the welder and the power source. Ensure the outlet and breaker are rated for 40 A to avoid nuisance tripping.

8 AWG Copper Conductor Capacity

The single specification that determines suitability is the 8 AWG all-copper conductor rated for 40 A continuous duty. If your welder draws more than 40 A or requires a different plug configuration, this cord will not meet the load or connection requirements.

Highlights

  • 50 ft reach extends power to distant outlets
  • 40 A pure-copper conductors handle heavy welder loads
  • STW jacket rated from -40 °F to 140 °F resists weather and heat
  • NEMA 6-50P male and 6-50R female fit most welders
  • ETL approved for verified safety compliance

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the cord is delivering full power to my welder after I plug it in?

The cord uses 8 AWG all-copper conductors rated for 40 A at 250 V; if your welder runs at its normal duty cycle without tripping the breaker, the cord is performing as specified.

What comes with the cord and what must I supply myself?

The package includes the 50 ft extension with a NEMA 6-50P male plug and a NEMA 6-50R female receptacle plus a carrying strap; you only need to provide the welder and a matching 6-50 outlet.

Which length or gauge should I choose for a 40 A welder?

This model is a single 50 ft, 8 AWG assembly rated 40 A at 250 V; no other lengths or gauges are offered for this product.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

More in Power Extension Cords

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.