BFKK
BFKK 47in Paintable Cable Raceway Cord Cover Kit White W0.95in H0.47in
A 47-inch paintable PVC raceway with adhesive backing hides one to three cables and installs without tools
- Conceals up to 3 cables for a tidy look
- Three 15.7 in sections combine to a 47 in run
- Strong adhesive backing installs without tools or drilling
- Paintable white PVC surface matches any wall colour
- Low .47 in profile keeps wires safe from kids and pets
Paintable cable raceway kit
This 47 inch paintable cable raceway kit provides a medium capacity cord cover system for indoor use. Three 15.7 inch sections join together to conceal one to three cables along a wall surface. The white PVC channel measures 0.95 inch wide by 0.47 inch high and accepts paint for a seamless finish. Strong adhesive backing allows tool free mounting on prepared surfaces.
Renters and homeowners hiding few cords
The kit suits anyone needing to tidy a small cluster of wires behind a TV or desk without drilling holes. It works well for two HDMI cables or up to five Cat 6 Ethernet cables in a single run. Builders routing large bundles, thick power cords, or cables through corners should look at larger trunking systems. The fixed 47 inch total length also limits coverage for very long runs.
Capacity up to three cables
The channel comfortably handles two HDMI leads or five Cat 6 Ethernet cables within its 0.95 by 0.47 inch cross section. Adding a third cord remains practical if the wires are thin, but thicker plugs or stiff sheathing will exceed the available space. The three sections splice together for straight runs only; bends, branches or extensions beyond 47 inches require additional kits.
Highlights
- Conceals up to 3 cables for a tidy look
- Three 15.7 in sections combine to a 47 in run
- Strong adhesive backing installs without tools or drilling
- Paintable white PVC surface matches any wall colour
- Low .47 in profile keeps wires safe from kids and pets
Specifications
No published specifications for this item yet.
Other versions of this model
2 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
What surface preparation is needed before sticking the adhesive-backed raceway to the wall?
Clean and dry the wall so the strong adhesive backing can bond securely; pre-position each 15.7 in section to avoid re-pasting and wall damage
Can the 0.95 in wide by 0.47 in high channel fit a thick power brick or only slim cables?
The medium-capacity channel holds 1 to 3 cables such as 2 HDMI or 5 Cat 6 Ethernet leads; bulky power adapters will not fit inside
How can I verify the kit is concealing wires safely after mounting?
Check that all cables sit fully inside the PVC raceway, the cover snaps shut without gaps, and the adhesive holds the 47 in run firmly so nothing shifts or exposes live conductors
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.





