We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 16.4 ft warm white LED strips on reels with dimmer and power adapter

BFKK

BFKK 32.8 ft LED Strip Lights 600 LEDs 12V Warm White 3000K

SKU CH-XCXX-DA9CZ

A 32.8 ft dimmable LED strip kit with 600 SMD 2835 LEDs delivering 1640 lumen warm white light at 3000K, 10 brightness levels and a safety-certified 12V adapter

  • 600 SMD 2835 LEDs deliver 1640 lumen warm white output
  • 10 dimming levels from 10 to 100 percent with simple press control
  • 8 foot total length in two 16.4 foot rolls for flexible layout
  • 12 volt power adapter with SCS 800613 certification ensures low voltage safety
  • 1 mm thick self-adhesive backing plus 10 clips for secure indoor installation

Product Identity

The BFKK kit supplies 32.8 ft of flexible LED tape divided into two 16.4 ft rolls. It carries 600 SMD 2835 emitters that produce 1640 lumen of 3000 K warm white light and runs from a 12 V safety adapter certified to SCS 800613.

Capacity and Headroom

The 10-level dimmer adjusts output from 10 % to 100 % with a long press and signals the limits by flashing. The 1 mm adhesive backing plus ten included clips hold the strips on clean indoor surfaces such as cabinets, shelves or bedroom coves, but the non-waterproof construction rules out bathrooms or exterior use.

Interface Practical Limits

Power is limited to the supplied 12 V adapter, so the system cannot be extended beyond the provided 32.8 ft without additional hardware. The inline controller handles on/off and brightness only; it offers no colour change, scheduling or smart-home integration, and the fixed 3000 K output cannot be shifted to cooler or coloured light.

Highlights

  • 600 SMD 2835 LEDs deliver 1640 lumen warm white output
  • 10 dimming levels from 10 to 100 percent with simple press control
  • 8 foot total length in two 16.4 foot rolls for flexible layout
  • 12 volt power adapter with SCS 800613 certification ensures low voltage safety
  • 1 mm thick self-adhesive backing plus 10 clips for secure indoor installation

Specifications

No published specifications for this item yet.

Questions about this item

Will the 12 V adapter run from the same switched outlet I use for my existing under-cabinet fluorescents?

Yes, the included 12 V safety adapter plugs into a standard mains outlet and powers the full 32.8 ft run, so it can share the same switched circuit as your old fixtures.

How do I confirm the 600 SMD 2835 LEDs are delivering the rated 1640 lumens at 3000 K after installation?

Turn the dimmer to maximum — 100 % brightness — and the strip should emit a steady warm-white glow without flashing; the status LEDs around the dimmer button will stay lit, showing the controller is active.

Does the kit include the 10 mounting clips and the dimmer, or do I need to buy them separately?

Both are in the box: 10 clips for extra hold and a dimmer with adhesive back and status lights; no extra parts are required for a basic install.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.