We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A silver rack-mount metal box with 28 Ethernet ports and two SFP slots

BFKK

BFKK 28-Port Gigabit PoE+ Switch 24×PoE+ 2 Uplink 2 SFP 320W

SKU CH-XES6-6GP82

A 28-port Gigabit PoE+ switch delivering up to 30W per port across 24 PoE+ ports with a 320W total budget, plus two uplink and two SFP ports

  • 24 PoE+ ports power cameras and access points with up to 30 W each
  • 320 W total PoE budget supports many devices simultaneously
  • 2 Gigabit uplink and 2 SFP ports connect to NVR or core network
  • One-key VLAN isolates ports 1-24 for security while keeping uplink access
  • Unmanaged plug-and-play with auto MDI/MDIX needs no configuration

28-Port Gigabit PoE+ Switch

The BFKK switch provides 24 PoE+ RJ45 ports, two Gigabit uplink ports and two SFP ports for fibre uplinks. It targets installers deploying IP cameras, wireless access points or VoIP phones that need both data and power over a single cable. The unit is unmanaged and rack-mountable for simple integration.

Sustained load behaviour

A total PoE budget of 320 W is shared across the 24 powered ports, each capable of delivering up to 30 W under IEEE 802.3af/at. The switch automatically detects powered devices and supplies power only when requested, while non-PoE devices receive data without interruption. Non-blocking forwarding maintains wire-speed throughput on every port.

Thermals noise and power

Fanless operation keeps the switch silent in office or server-room environments. The metal chassis acts as a heatsink, dissipating heat from the 320 W PoE budget and the switching fabric without active cooling. Power consumption scales with the number of attached powered devices rather than running at the maximum continuously.

Highlights

  • 24 PoE+ ports power cameras and access points with up to 30 W each
  • 320 W total PoE budget supports many devices simultaneously
  • 2 Gigabit uplink and 2 SFP ports connect to NVR or core network
  • One-key VLAN isolates ports 1-24 for security while keeping uplink access
  • Unmanaged plug-and-play with auto MDI/MDIX needs no configuration

Specifications

No published specifications for this item yet.

Questions about this item

How much heat and power does the 28-port PoE+ switch draw when all 24 PoE+ ports are loaded to 30 W each?

The total PoE budget is 320 W, so full 30 W loading on every port would exceed that limit; actual draw depends on how many devices you power and their individual demands.

What cables or modules do I need to use the two SFP uplink ports?

The SFP ports accept standard Gigabit SFP transceivers; you supply the modules and matching fibre or copper patch cables for the uplinks.

Will the switch pass traffic to a legacy 10 Mbps camera on one port while a 1 Gbps NVR uses an uplink?

Yes, each RJ45 port auto-negotiates 10/100/1000 Mbps, so the 10 Mbps camera and the 1 Gbps NVR operate simultaneously without configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.