We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white rectangular PoE extender with three Ethernet ports

BFKK

BFKK 2-Port Gigabit PoE Extender 100m 328ft 1000Mbps IEEE 802.3af/at

SKU CH-1E8H-X24CG

Two-port Gigabit PoE extender adds 100 metres of power and data reach for cameras or access points with plug-and-play setup

  • Power two devices from one PoE source with 1 in 2 out design
  • Extend power and data an extra 100m (328ft) beyond standard cable limits
  • Gigabit 1000Mbps throughput keeps video streams smooth and stable
  • Works with IEEE 802.3af/at cameras, switches and access points
  • Plug-and-play install needs no software or configuration

2-Port Gigabit PoE Extender

This compact extender accepts a single PoE input and splits it to two powered devices, extending network reach by an additional 100m (328ft). It is built for indoor deployments where cameras, access points or other PoE endpoints sit beyond standard cable limits. No software or configuration is required.

1000Mbps throughput and 100m headroom

The unit delivers full gigabit data rates across the extended segment, supporting smooth video streams and regular traffic. Each added extender contributes another 100 metres of reach; beyond that distance, signal and power drop off and a further extender or switch is needed.

IEEE 802.3af/at compliance

The extender works only with equipment that follows the 802.3af or 802.3at PoE standards. Devices using passive PoE, higher-power 802.3bt or non-standard voltages will not operate correctly with this unit.

Highlights

  • Power two devices from one PoE source with 1 in 2 out design
  • Extend power and data an extra 100m (328ft) beyond standard cable limits
  • Gigabit 1000Mbps throughput keeps video streams smooth and stable
  • Works with IEEE 802.3af/at cameras, switches and access points
  • Plug-and-play install needs no software or configuration

Specifications

No published specifications for this item yet.

Questions about this item

Will the 1000Mbps PoE extender work with my existing 100Mbps switch and cameras?

Yes, the extender supports 1000Mbps data transmission and is backward compatible with slower Ethernet speeds, so it will pass data and power from a 100Mbps source to two devices.

How can I verify the extender is delivering both power and data correctly after plugging it in?

Check that the connected PoE devices — such as cameras or access points — power up and show a stable network link; the plug-and-play design requires no software to confirm operation.

Does the package include Ethernet cables or a PoE injector, or must I buy them separately?

The extender itself is supplied; you will need to provide the incoming PoE cable from your switch or injector and two outgoing cables for the devices you want to power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.